Power Distribution Units (231 products)

Modular Rackmounted IT Power Distribution Unit 138KW 200A 400V 18 Pole 5U

System mobilityPDU equipment can easily be relocated to accommodate a changing data center environment.Multiple distribution optionsSuperior design flexibility enables a wide range of customer requirements to be addressed.Meets UL RequirementsHigh Power DensityProtectionUL-listed Touch-safe backplaneAdding Power Distribution Modules requires no hot work; one trained user can safely add new modules without removing power to the existing PDU loadMultiple distribution optionsSuperior design flexibility enables a wide range of customer... More Info

230V, 16A, 3000 VA, IEC Jumpers, 3-wire, 1m Cord, 2.27kg, Black

APC Maintenance Bypass Panels , Input: 230V , Output: 230V , Output Connections: Hard Wire 3-wire (H N + G),IEC JumpersQuick Transfer RateTransfer rate is within the industry standard and within the time power supplies will typically drop loads. The transfer of one power source to another is seamless to the connected equipment avoiding disruption of equipment performance.Wrap Around System Bypass(3) Breaker maintenance bypass panel to isolate the UPS from the critical load More Info

IP Phone Power Injector For 7900 Series Phones

The Cisco Unified IP Phone Power Injector is a midspan power injector designed and tested for use with Cisco Unified IP phones. The Cisco Unified IP Phone Power Injector sits between a switch port and the Cisco Unified IP phone, providing inline power capability to an unpowered switch port. It supports Cisco midspan power, IEEE 802.3af modes for supplying power to the attached phone, and 10/100/1000BASE-T Ethernet connections. More Info

IT Power Distribution Module 3 Pole 5 Wire 32A IEC309 740cm

- High Power Density- Low Cost Power Distribution- Meets UL Requirements More Info

Rack PDU 2G, Switched Plus, ZeroU, 32A, 230V, (21) C13 & (3) C19

APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and individual outlet power metering. Remote outlet level controls allow power on/off functionality for power recycling to reboot locked-up equipment and to avoid unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering... More Info

Rack PDU 2G, Metered, ZeroU, 11kW, 230V, (36) C13 & (6) C19

APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. User-defined alarm thresholds mitigate risk with real-time local and remote alerts to warn of potential circuit overloads. Metered Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership. Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC... More Info

Rack PDU 2G, Switched, ZeroU, 20A/208V, 16A/230V, (7) C13 & (1) C19

Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.Remote Individual Outlet ControlRemotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize... More Info

Rack PDU 2G, Switched, ZeroU, 11kW, 230V, (21) C13 & (3) C19

APC Switched Rack PDU , Input: 400V 3PH , Input Connections: IEC 309 16A 3P+N+PE, IEC 309 20A 3P+N+E , Cord Length: 6 feet ( 1.83 meters ) , Output: 208V, 230V , Output Connections: IEC 320 C13,IEC 320 C19.Includes: Installation guide, Rack Mounting brackets, Safety guide, Sample locking IEC power cord, Serial configuration cable. More Info

InfraStruXure Modular IT Power Distribution Unit

Network Management Provides proactive power and environmental management via web and/or SNMPLow Cost Power Distribution Provides a number of outlets to bring power to rack equipment at an affordable price.Information Displays Indicates the status of the AC sources powering the units, as well as indicates which source is set as the primary source and which source is currently supplying power to the load. This provides a visual depiction of the power flow from the input to the load. This allows the user to quickly glance at the power flow and... More Info

Rack PDU 2G, Switched, ZeroU, 20A, 208V, (7) C13 & (1) C19, L620 Cord

Network ManagementFull-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.Remote Individual Outlet ControlRemotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up... More Info

Basic, 1U, 16A, 208V, (12)C13

Rack-MountableIncludes horizontal, vertical, and toolless-mount varieties. Puts power where it is needed most - in the racks near the equipment.Single input power sourceSupply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections.Wide range of input and output connectionsProduct family includes a variety of input and output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having... More Info

WW 10KVA Isolation Transformer

Rack-MountableIncludes horizontal, vertical, and toolless-mount varieties. Puts power where it is needed most - in the racks near the equipment.Transformer for Step-down or Step-up or IsolationStep down transformer placed upstream of the UPS to avoid inrush current and saturation eliminating need to oversize transformerHeavy duty designThe Vault Lock’s heavy duty hardened steel construction provides the highest degree of portable tampering protection available on the market. More Info

ePDU G3 Metered Input, 4kW, 230V In, 1 x 60309 16A In, 20 x C13 & 4 x C19 Out

New ePDU G3 Metered Input models feature best-in-class technologies, including ±1% billing grade accuracy, an advanced LCD pixel display, a hot-swap meter and the ability to daisy chain four ePDUs to share the same network connection and IP address. More Info

HP PDU Management Module, 1 x Serial, Green Compliant, 590g

The HP PDU Management Module enables you to monitor and manage power environments through comprehensive control of individual HP PDUs. The management module can be configured to send alert traps to HP Systems Insight Manager and other SNMP management programs or used as a standalone management system. This flexibility enables you to monitor and manage with up to two PDUs through the network connector or serial connector located on the front of the management module. To facilitate day-to-day maintenance tasks, the embedded management software... More Info

Rack PDU, Switched, Zero U,12.5kW,208V,(21)C13&(3)C19; 10' Cord

-Flash Upgradeable: Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only).-High Power Density.-Local and web-based monitoring: Status available to customers both in the data center and remotely.-Power Sequencing.-Redundant Internal Power Supplies.-Remote Current Monitoring.-Toolless mounting capability.-Vertical mounting capability. More Info