Cat6 Networking (40 products)

Jack to Jack Keystone Jack Module

The Keystone Couplers requires no termination, just simple plug in RJ45 Cables each end The module offers a high performance transmission that meets or exceeds Cat5e & Cat6 standards. They have been designed to be installed into most UK and European keystone applications, including standard or angled faceplate products, patch panels or surface boxes. Features Quick and easy to install Suitable for all standard keystone applications Cat5e & Cat6 hardware performance More Info

Booted Cat6 RJ45 UTP Patch Cables in a wide range of colours and lengths up...

This range of RJ45 Cat6 Patch Leads are manufactured to exceed all current enhanced Cat6 specifications. Each patch cable is tested to ensure quality and performance. Manufactured with a moulded style boot which provides strain relief and prevents the cable becoming loose from the plug. For ease of installation the boot on each RJ45 lead doesn’t provide latch protection and is suitable for use in high density installations. This range of Cat6 Patch Leads is available in 9 colours and lengths from 0.3m to 20mt from stock. Made with high... More Info

100mt Reel or 305mt box of Cat6 UTP Cable

Category 6 unshielded twisted pair cable is designed for use in next generation data communications networks, and will comfortably support all present applications including Gigabit Ethernet. Connectix Category 6 UTP Solid Cable offers the performance characteristics required by the ever present Category 6 Standard. When used in conjunction with Connectix Category 6 Modules and Patch Panels the user will get a link performance exceeding Category 6 Specification requirements. Cat6 UTP PVC Cable Details: Features: Category 6 performance... More Info

Connectix Cat6 Easy RJ45 Pass Through Connectors have been designed with...

1 Pot = 100 plugs1 box = 20 PotsOur 'Easy' range of RJ45 pass through plugs are made from high quality engineered plastic with brass gold over nickel plating contacts. For best results use with the 'Easy crimp tool allows you to cut, strip and terminate a plug all in one. The Crimp tool Trims the excess wires as it crimps Features & Benefits Easy to verify RJ45 568A or 568B colour code Gold Plated Contacts For best results use Connectix Easy RJ45 Crimp Tool Cat6 Performance See below for the 4 step 'Easy' Instructions 1 Remove... More Info

Cat6 Leads Made from LDPE Cat6 Solid Cable for External Use

Connectix Cabling System External RJ45 Patch leads are available in lengths from 10mt to 75mt. Designed to run externally, these patch leads are ideal for using to link outbuildings. These RJ45 leads are made to order using high quality Cat6 connectors and black solid LDPE Cat6 UTP Cable. Each patch cable is individually tested and bagged to ensure quality and performance. Features: Each lead is individually bagged & QA tested  Plugs conform to ISO8877 More Info

Cat6 LSOH/LSZH Solid Core Cable - Purple Outer Sheath

Cat6 unshielded twisted pair cable is designed for use in next generation data communications networks, and will comfortably support all present applications including Gigabit Ethernet. Connectix Cat6 UTP Solid Cable offers the performance characteristics required by the ever present Cat6 Standard. When used in conjunction with Connectix Cat6  Modules and Patch Panels the user will get a link performance exceeding Category 6 Specification requirements. Cat6 UTP LSOH Cable Details: Features: LSOH (Low Smoke Zero Halogen) Outer Sheath... More Info

High density 24 Cat6 RJ45 Ports in 1u of space

Category 6 high density patch panels provide the performance needed for present and next generation data communications networks and applications, including Gigabit Ethernet. The high density format is ideal where cabinet space is at a premium. Available in a 1u 24 port format, these Category 6 high density panels achieve optimum transmission performance by incorporating the highest quality components and innovative on-board compensation techniques. The front of the panel features write-on designation labels for each port as well as... More Info

Connectix Easy RJ45 Pass Through Connectors have been designed with speed and...

1 Pot = 100 plugs1 Box = 20 PacksThe FTP Cat6 modular plugs are made from high quality engineering plastic with brass gold over nickel plating contacts. For best results use with the 'Easy' crimp tool, it allows you to cut, strip and terminate a plug all in one. The Crimp tool Trims the excess wires as it crimpsEasy to verify RJ45 568A or 568B colour code Gold Plated Contacts Three prong terminal for both wire and solid wire stranded For best results us Connectix Easy RJ45 Crimp Tool Cat6 Performance**Please note, these Plugs will not fit... More Info

Faceplate, preloaded with Cat6 Modules - available with 1, 2 or 4 modules

Pre Loaded Faceplates (singlegang for 1 or 2 modules, doublegang for 4 modules) consist of either one or two euromod size modules and a faceplate, with blanks where appropriate. Supplied in a sealed bag these plates save time and money by reducing on site installation and assembly time. Details: Features: Cat6 Compliant Built in slide label system Lifetime product warranty 25 year system warrantyModule Details: CCS Cat6 RJ45 modules are designed to provide one of the shallowest wall outlets on the market. They are the ideal... More Info

Shielded Cat6 FTP RJ45 Patch Leads

Connectix Cat6 FTP Patch Leads are designed to exceed the performance requirements of the Category 6 Specification. The Connectix Cat 6 Patch Leads are made from Cat6 stranded cable and are terminated using high performance modular plugs. The fully shielded patch leads increase signal isolation and prevent contaminant noise from entering a cabling system. Each lead is individually factory tested to the standard to ensure true Cat6 compatibility. Details:// Features:Fully shielded for signal protection Shielding prevents... More Info

Shielded Cat6 Cable with a LSOH outer sheath - available in Purple

Category 6 FTP twisted pair cable is designed for use in next generation data communications networks, and will comfortably support all present applications including Gigabit Ethernet. Connectix Category 6 FTP Solid Cable offers the performance characteristics required by the ever present Category 6 Standard. When used in conjunction with Connectix Category 6 Shielded Modules and Patch Panels the user will get a link performance exceeding Category 6 Specification requirements. Details: Features: Category 6 performance UL tested Individually... More Info

High density 48 Cat6 ports in 2u of space

Category 6 high density patch panels provide the performance needed for present and next generation data communications networks and applications, including Gigabit Ethernet. The high density format is ideal where cabinet space is at a premium. Available in a 2u 48 port format, these Category 6 high density panels achieve optimum transmission performance by incorporating the highest quality components and innovative on-board compensation techniques. The front of the panel features write-on designation labels for each port as well as... More Info

RJ45 Crimp Tool, for use with Easy RJ45 UTP & FTP Pass through Plugs

The 'Easy' RJ45 Crimp tool works perfectly with the 'Easy' Cat6 UTP & FTP Pass Through Plugs.With its added cutting function, this crimp tool trims off the excess wires as it crimps the RJ45 plug.- For use with RJ45 Pass through plugs- Can be used to cut outesheath of cableSee below for the 4 step 'Easy' Instructions 1 Remove approximately 20mm of outer jacket using the multi-purpose crimp tool.2 Arrange wires into the correct colour code sequence (most commonly EIA/TIA 568B). Slot cable into the plug pushing the wires through. Outer... More Info

Metal Faceplates pre-loaded with Cat6 UTP Modules available in 7 finishes

Single gang metal faceplate loaded with one or two Cat6 Modules Double gang metal faceplate loaded with 4 Cat6 Modules Fit perfectly onto standard size single gang back boxes Ideal for installing into situations where matching the surrounding décor is important. Module DetailsThe Cat6 compact module is designed to provide one of the shallowest outlets on the market. They are the ideal solution wherever back box depth is a problem. Installation is made easy with individual colour codes and the use of industry standard IDC’s. Cat6 modules... More Info

Cat6 RJ45 Patch Leads Made to Your Specification

Using our in-house cable assembly facility, we are able to manufacture virtually any type of Cat6 UTP RJ45 Patch Leads to your exact specification. Each RJ45 lead is individually tested to ensure quality and performance. All leads are made with high quality 100% copper stranded patch cableFeatures: Fully conforms to ANSI/TIA-568-C Made to order in any length Each lead is individually QA tested Plugs conform to ISO8877 Minimum order quantity of 10 leads   || Please select the options on the right to build the lead you require. Please note... More Info