Secure your Cat6 network connection with these unique PatchLock RJ45 Patch Cables. PatchLock Key Required - Sold Separately
Made to order, 3 - 4 days
Don't forget to order your PatchLock Key, required for unlocking cables PatchLock RJ45 Patch Leads are a simple yet ... Read More
This product is no longer in stock
PatchLock RJ45 Patch Leads are a simple yet highly effective way of preventing accidental or malicious removal of cables on your network. PatchLock leads are 100% compatible with any standard RJ45 socket resulting in no extra costs involved with retrospectively upgrading existing sockets.
These Cat6 PatchLock Cables have been made using the highest quality shielded FTP Cat6 Cable and FTP RJ45 Cat6 Plugs.
Insertion and removal is made using a simple key tool.
Instructions for Use:
Insert the RJ45 plug into the RJ45 socket as normal. Push the coloured locking lever forward to lock the plug.
To remove the plug from the socket use the Boot Key Removal Tool. The coloured protective cap must be removed before the tool can be used.
Attach the Removal Key to the rear of the coloured locking lever as shown below.
Pull the Removal Key away from the plug to unlock the coloured locking lever.
To remove the key from the coloured locking lever, lift upwards until the key detaches. Care should be taken not to use excessive force as this may damage the key.
The RJ45 plug can then be removed from the socket in the normal way by compressing the latch.
|Boot Type||Strain Relief with Latch Protection|
|Cable type||Cat6 UTP PVC|
|Colours||Grey, Red, Green, Blue, Yellow, Purple, Orange, Black & White|
|Lengths||0.5m, 1m, 1.5m, 2m, 3m, 5m, 10m, 15m, 20m|
Secure your Cat6 network connection...
Bulk NUC Kit NUC7i3DNHE, 5 pack
16-Port PS/2-USB VGA LCD KVM over IP Switch with Daisy-Chain Port and...
8-Port PS/2-USB VGA LCD KVM over IP Switch with Daisy-Chain Port and USB...
20x 1G RJ-45, 4x 1000BASE-T SFP, 4x 10G SFP+, 128 Gbps, PoE, VLAN, 441 x...
Keyed Cable Lock for Surface Pro