Connectix Cat6 Easy RJ45 Pass Through Connectors have been designed with...
1 Pot = 100 plugs1 box = 20 PotsOur 'Easy' range of RJ45 pass through plugs are made from high quality engineered plastic with brass gold over nickel plating contacts. For best results use with the 'Easy crimp tool allows you to cut, strip and terminate a plug all in one. The Crimp tool Trims the excess wires as it crimps Features & Benefits Easy to verify RJ45 568A or 568B colour code Gold Plated Contacts For best results use Connectix Easy RJ45 Crimp Tool Cat6 Performance See below for the 4 step 'Easy' Instructions 1 Remove... More Info
Connectix Easy RJ45 Pass Through Connectors have been designed with speed and...
1 Pot = 100 plugs1 Box = 20 PacksThe FTP Cat6 modular plugs are made from high quality engineering plastic with brass gold over nickel plating contacts. For best results use with the 'Easy' crimp tool, it allows you to cut, strip and terminate a plug all in one. The Crimp tool Trims the excess wires as it crimpsEasy to verify RJ45 568A or 568B colour code Gold Plated Contacts Three prong terminal for both wire and solid wire stranded For best results us Connectix Easy RJ45 Crimp Tool Cat6 Performance**Please note, these Plugs will not fit... More Info
RJ45 Crimp Tool, for use with Easy RJ45 UTP & FTP Pass through Plugs
The 'Easy' RJ45 Crimp tool works perfectly with the 'Easy' Cat6 UTP & FTP Pass Through Plugs.With its added cutting function, this crimp tool trims off the excess wires as it crimps the RJ45 plug.- For use with RJ45 Pass through plugs- Can be used to cut outesheath of cableSee below for the 4 step 'Easy' Instructions 1 Remove approximately 20mm of outer jacket using the multi-purpose crimp tool.2 Arrange wires into the correct colour code sequence (most commonly EIA/TIA 568B). Slot cable into the plug pushing the wires through. Outer... More Info
A simple network tester to check continutity and connectivity
The Connectix Pocket Socket Tester is a quick, easy to use tool to verify connectivity. Its unique snap-together design makes it easy to take on-site. The tester gives an instant indication of the connections present, because its four bi-colour LEDs indicate the status of the pairs in the cabling. A separate indicator also shows the shield connection for shielded systems. The circuitry has been specially designed to identify crossover patch cords. But the tester is equally suited to check a single patch cord or a complete channel. Features:... More Info
RJ45 Boots - Available Individually
RJ45 Boots to provide strain relief and latch protection on RJ45 CablesThese Boots are suitable for use with Cat5e, Cat6 & Cat6a Stranded Cable. They can also be used on Cat5e & Cat6 Solid Cable.They will not fit onto Cat6a Solid Cable. More Info