Top sellers
MTP Trunk Cables fitted with MTP connectors at each end, made to your...
The CCS Starlight® Pre-terminated Plug and Go Fibre System provides the Rapid Fibre Deployment market with an extremely cost effective, expandable and high speed system. Starlight® utilises MTP® brand pre-terminated assemblies to ensure optimum performance is achieved when interconnecting pre-terminated Starlight® cassettes and panels. Assemblies are available in 12 & 24 fibres, and micro and ruggedised cable in multimode OM2 50/125, OM3 50/125, OM4 50/125 and singlemode OS2 9/125 options. The Starlight® System is manufactured in our own... More Info
Rack Power Distribution Unit with BS 1363 UK Sockets and IEC 60320 C14 Plug...
A full range of high quality BS1363 UK outlet Power Distribution Units range with a built-in blue LED quality ammeter.Key Features: BS1363 UK Sockets Internal RMS Current Ammeter External earth facility Choice of standard and filtered solutions with input plug variants 1.5u Height More Info
DDA Compliant single gang faceplate to take up to 2 Euro Modules
Grey faceplate Ideal for installations that requires a high contrast between the mounting surface and the outlet (as specified in the Disibility Discrimination Act) More Info
Metal Faceplates pre-loaded with Cat5e UTP Modules.
Single gang metal faceplate loaded with one or two Cat5e Modules Double gang metal faceplate loaded with 4 Cat5e Modules Fit perfectly onto standard size single gang back boxes Ideal for installing into situations where matching the surrounding décor is important. Module DetailsThe Cat5e compact module is designed to provide one of the shallowest outlets on the market. They are the ideal solution wherever back box depth is a problem. Installation is made easy with individual colour codes and the use of industry standard IDC’s. Cat5e modules... More Info
Right angled Cat 5e RJ45 Patch Panel for ease of installation
The Connectix 2020 Series Patch Panel is an alternative to The Enhanced Category 5e High Density Panel. It offers the same Enhanced Category 5e performance as the standard panel but has been designed to present the cable termination IDCs horizontally on a tray at the rear of the panel, making termination and cable management easier. Connectix Enhanced Category 5e 24 Way Panels achieve optimum transmission performance by incorporating the highest quality components and innovative on-board compensation techniques. The front of the panel... More Info
SC Fibre Optic Connectors available in Multimode, Singlemode & Singlemode...
The SC connector is one of the most popular connectors used today. It can be seen in every area of the communications environment, from a telecoms distribution room to a Local Area Network closet. The SC connector has set the standard for optical fibre connectors. SC connectors are manufactured using the best quality components and they exceed all areas of the standards covering optical fibre connectors. The one-piece design features pre-radiused ceramic ferrules, and are suitable for use with two part heat curing epoxies and cold cure... More Info
Designation strip for use with Disconnection Strips
51A Designation Strips are used to identify connections on Disconnection strips More Info
4 Way Mains extension leads with surge and spike protection and neon...
4 Way Mains extension leads with surge and spike protection and neon indicator.Protects computers and sensitive electronic equipment from being damaged by electrical surges and spikes Conforms to BS1363/A Keyholes for wall mounting More Info
600mm Wide x 600mm Deep Floor Standing Data Cabinet
RackyRax 19” Data Cabinets combine all the features of a premium data cabinet including the aesthetically pleasing design, without the price-point to match. The Data Cabinets are available in various configurations and are supplied fully assembled. Each cabinet utilises a ventilated top and four 19” adjustable front and rear mounting posts. The cabinets feature lift-off sides and a lockable door for maximum access to the internal equipment, with cable access in the base for convenient routing of network cables. The side panels can be fitted... More Info
6 Way Mains extension leads with surge and spike protection and neon...
6 Way Mains extension leads with surge and spike protection and neon indicator.Protects computers and sensitive electronic equipment from being damaged by electrical surges and spikes Conforms to BS1363/A Keyholes for wall mounting More Info
Compact 10" Data Cabinet, Ideal for Small Office or Home Office Installations.
*Please Note* This cabinet is currently supplied without a back plate (as shown in the picture)The compact design of the Racky Rax 8u Cabinet makes it the ideal housing for small network requirements, allowing integration of voice, data, ISDN and internet connections in one neat unit. The cabinet has been designed to fit perfectly into both the office and home environment, and has an 8u capacity for the Connectix Office System range of 10” networking hardware and patching equipment. The cabinet is available in a black finish. The lockable... More Info
Metal Faceplates pre-loaded 4 Cat6 UTP Modules available in 7 finishes
Doublegang metal faceplate loaded with four cat6 modules Fit perfectly onto standard size double gang back boxes Ideal for installing into situations where matching the surrounding décor is important. Module DetailsCategory 6 modules provide the performance needed for present and next generation data communications networks and applications, including Gigabit Ethernet. The use of next generation components and specially designed boards allow a bandwidth of 250MHz to be achieved. Connectix Category 6 Modules are fully compliant with... More Info
Straight Through RJ45-BT Lead
Available in 3 & 5 metres lengths BT connector terminated one end and RJ45 connector terminated the other end. For Connection between voice port and data port These leads are made to order, next day delivery may not be available. THESE LEADS ARE WIRED FOR USE WITH OUR SECONDARY VOICE CONVERTERS. If you require a different spec or more information call Cablemonkey Sales More Info
Custom made E2000 Leads made to order
Designed to be the ultimate in optical fibre connectors, the E2000 connectors exceed all standards for performance and operation. These made-to-order E2000 leads are available in all fibre types and also with LC or SC connectors at the other end. The E2000 connectors are available in both multimode and singlemode options. Options:Length - Choose the length for your requirements Cores - Simplex of Duplex Connector Types - E2000, SC & LC Fibre SIzes - 62.5/125 (OM1), 50/125 (OM2), 50/125 (OM3), 50/125 (OM4) & 9/125 (OS2)Features... More Info
Crossover RJ45 Cat5e UTP Leads
Connectix Cabling system RJ45 Un-booted crossover leads have been designed to exceed the performance criteria set for Enhanced Category 5 Patch cords. These patch leads are ideal when you need to link computer to computer direct, they are manufactured to exceed all current enhanced Cat5e specifications. Each patch cable is individually tested and bagged to ensure quality and performance. Manufactured unboooted to assist with higher densigh installations. This range of Cat5e Patch Leads is available in red & grey and lengths from 1mt... More Info