Network Accessories (1910 products)
Network Accessories
Inside Network Accessories
Cat6 Gigabit Snagless Molded UTP Patch Cable (RJ45 M/M) - Black, 4.57 m (15-ft.)
Batteries not Required to OperateWith Tripp Lite's category 6 molded patch cables you can stay ahead of the game by using this high-speed cable to distribute data, voice and video. These cables deliver stable performance up to 550MHz. Each comes UL verified meets EIA/TIA Cat6 TIA/EIA-568-B-2.1 draft 9 standards. Constructed with high-quality copper wire and a staggered-pin plug design, near-end crosstalk levels are kept to a minimum. Designed for use in category 6, category 5e and category 5 applications. Cat6 cables are available in a... More Info
10m SC-SC 9/125 OS1 Duplex Singlemode PVC Fibre Optic Cable (LSZH) - Yellow
Cost-effective solution that provides high bandwidth and transmission rates over longer distances. With SC to SC termination, this high quality fibre optic patch cable is specifically designed for Gigabit Ethernet applications.The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke and halogen emissions when the cable is exposed to extreme temperatures.This reduces the amount of harmful toxic and corrosive gases that cabling made with plastic materials would otherwise emit into the air during... More Info
30m Cat6 550MHz Snagless Patch Cable Black
This USB 3.0 cable by Delock can be connected to an active USB port and enables an extension of 10 m. By connecting an additional 10 m extension cable you can extend your USB port up to 20 m. More Info
Female DCE RS232 Cable - 3 m
One of the most complicated parts of setting up a network system (router, switch, hub, or access server) is the selection of the serial cables to connect the network system to the serial devices in your network. There are many different serial cables with seemingly similar features, and finding the correct cable can be a challenge. The information that follows will quickly and easily guide you through the process of selecting the right serial cables for your network.Selecting the proper serial cable is as easy as knowing the answers to three... More Info
BladeSystem c-Class 3m 10-GbE CX4 Cable Option
BladeSystem c-Class 3 meter 10-GBe CX4 Cable Option More Info
StarTech.com MPO/MTP Fiber Optic Cable - Plenum-Rated - OM3, 40Gb -...
Terminate twelve fiber connections using a single 40 Gigabit network cable -- designed for high-density fiber networksThis MPO/MTP fiber optic cable houses 12 fibers and lets you interface between different networking devices of varying speeds. For example, you can set up a one-to-one connection between two 40Gbps switches or servers. Alternatively, you can connect a 40Gbps switch and break out the 40Gbps into six duplex 10Gbps LC connections on a patch panel or network cassette, which then fans out to individual 10Gbps devices.The MTP... More Info
Cat6 Gigabit Snagless Molded Patch Cable (RJ45 M/M) - White, 15-ft.
With Tripp Lite's category 6 molded patch cables you can stay ahead of the game by using this high-speed cable to distribute data, voice and video. These cables deliver stable performance up to 550MHz. Each comes UL verified meets EIA/TIA Cat6 TIA/EIA-568-B-2.1 draft 9 standards. Constructed with high-quality copper wire and a staggered-pin plug design, near-end crosstalk levels are kept to a minimum. Designed for use in category 6, category 5e and category 5 applications. Cat6 cables are available in a variety of colors with a snagless boot... More Info
3m Cat6 550MHz Snagless Patch Cable Red
This USB data- and charging cable by Delock is compatible to IPhone 5 and other devices with 8 pin connector. It enables a fast and simple data transfer as well as charging your IPhone etc. More Info
RS-232 Cable DTE Male 10 Feet
The router end of all EIA/TIA-232 adapter cables is a high-density 60-pin plug. The network end of the adapter cable is a standard 25-pin D-shell connector (known as a DB-25) that is commonly used for EIA/TIA-232 connections. Figure C-5 shows the connectors at the network end of the adapter cable.Do not use the Cisco Systems-provided EIA/TIA-232 adapter cable product number CAB-232MT= to connect a T1 interface that is configured for DTE mode directly to an NEC - NEXTSTAR 1E model C4969 MD/SAC unit interface that is configured for DCE mode.... More Info
StarTech.com MPO/MTP to LC Breakout Cable - Plenum-Rated - OM3, 40Gb -...
Fan out eight fibers from a 40Gbps MPO connection to four 10Gbps LC connectionsThis MPO/MTP to 8x LC breakout cable lets you fan out a single 40Gbps connection from a 40GBase-SR4 QSFP+ transceiver to four 10Gbps LC SFP+ transceivers.The push-and-pull tabs optimize accessibility and let you install or remove the connectors with one hand without using additional tools. Plus, the slim uniboot design of the LC connectors saves space and improves cable management.The MPO cable is housed in a plenum-rated jacket and is ideal for in-wall... More Info
Cat6 Gigabit Snagless Molded Patch Cable (RJ45 M/M) - Yellow, 15-ft.
With Tripp Lite's category 6 molded patch cables you can stay ahead of the game by using this high-speed cable to distribute data, voice and video. These cables deliver stable performance up to 550MHz. Each comes UL verified meets EIA/TIA Cat6 TIA/EIA-568-B-2.1 draft 9 standards. Constructed with high-quality copper wire and a staggered-pin plug design, near-end crosstalk levels are kept to a minimum. Designed for use in category 6, category 5e and category 5 applications. Cat6 cables are available in a variety of colors with a snagless boot... More Info
5m Cat6 550MHz Snagless Patch Cable Red
This cable by Delock can be plugged to the 40 pin female port of your ASUS Eee pad and connect e.g. HDDs, memory sticks with standard USB interface. The OTG function enables a direct data transfer between your mobile device and the USB device without connection to a computer. Furthermore this cable supports the usage of a mouse or keyboard, in order to operate your mobile device. More Info
Duplex Multimode 62.5/125 Fiber Patch Cable (SC/SC), 25M
Tripp Lite's 25 Meter ( 80ft. ) multimode duplex fiber optic SC/SC patch cable is manufactured from 62.5/125 zipcord fiber. The cable has SC connectors on each end, a PVC jacket and is FDDI and OFNR rated. duplex multimode fiber is most commonly used in LAN applications.- Premium PVC 62.5/125µm multimode patch cables- Attenuation loss meets or exceeds the latest industry standards - Manufactured from 62.5/125 duplex (zipcord) fiber - PVC jacket - Length: 25 Meter (80-ft.) Connectors: 2 SC connectors on each end - Insertion loss testing... More Info
StarTech.com MPO/MTP to LC Breakout Cable - Plenum-Rated - OM3, 40Gb -...
Fan out eight fibers from a 40Gbps MPO connection to four 10Gbps LC connectionsThis MPO/MTP to 8x LC breakout cable lets you fan out a single 40Gbps connection from a 40GBase-SR4 QSFP+ transceiver to four 10Gbps LC SFP+ transceivers.The push-and-pull tabs optimize accessibility and let you install or remove the connectors with one hand, without using additional tools. Plus, the slim uniboot design of the LC connectors saves space and improves cable management.The MPO cable is housed in a plenum-rated jacket and is ideal for installations... More Info