10-32 Hardware Kit
Cage nuts with #10-32 thread for mounting equipment in enclosure for square mounting rails. Accommodates devices using #10-32 mounting screws (Qty. 36). More Info
StarTech.com Mounting PC Case Fan Screws - 50 Pack
Securely mount case fans in a chassis with the proper screwsThis package of 50 PC case fan screws are great to have on hand for new system builds or upgrades.The StarTech.com Advantage- Self tapping thread design for quick and easy installation of most standard plastic-framed case fans- Comes in a pack of 50 for large installations or just having spares for future installations More Info
Bolt-Down Kit - Silver
Tripp Lite's SmartRack SRBOLTDOWN provides extreme stabilization and security for cabinets and racks. The bolt-down kit enables SmartRack to be secured to a concrete floor. SRBOLTDOWN includes four concrete inserts, four bolts and four fender washers.Technical Notes:We recommend using a 1/2" concrete drill. Hole must be 4.5" to 4.75" deep. Mark the hole, drill the hole, then tap the anchor into the hole. Thread the bolt into the anchor a few threads only. Tap the bolt with a hammer (with anchor attached) until it bottoms out in the hole,... More Info
Universal Projector Ceiling Mount, silver
See things in a better light.Easily put a projector in place and keep it in prime position. MANHATTAN Universal Projector Ceiling Mounts hold projectors stable and steady with precise tilt, 360° swivel and height adjustments that keep images clear, sharp and defined. Constructed of lightweight, quality aluminum materials, MANHATTAN Universal Projector Ceiling Mounts fit a range of models with a secure, confident and balanced overhead installation. Internal cable management helps conceal unsightly cords and connections for a professional,... More Info
Ceiling Grid Clip – Recessed
You use a ceiling grid clip to mount an access point on a suspended ceiling. The ceiling grid clip thatyou need depends on the ceiling tiles on your ceiling. If your ceiling tiles hang below the ceiling grid, this clip provides the best fit between the AP and the ceiling. More Info
DS100 Series – Individual Components: 28" Pole 1-1/2" diameter, Black
This pole easily attaches to a DS100 Free Standing or Grommet Mount Base. Replaces the shorter 14" pole in standard DS100 configurations when extra length is required.Benefits- Use pole to add a second crossbar or top-mounted pivot, or to move displays to a higher position- Accommodates larger displays where height of monitors is an issue- Mix and match DS100 stands and parts to create custom configurations More Info
Interface display strips, 101.6 cm (40 ") - 52", 160 kg, Black
PFW 5905 Interface display stripsVogel’s Professional introduces modular video wall solutions especially designed for 40 – 52 inch professional displays. With this modular concept you can create a video wall solution for every setup.The More Info
Full Motion Desk Mount for 13" to 27" Monitors
The VESA-compliant DDR1327S Full Motion Desk Mount Clamp attaches to your desk, table or workstation, allowing you to mount a monitor above it and free up valuable workspace. Ideal for home and office, the DDR1327S fits most flat-panel displays from 13 to 27 inches. The swivel arm can be independently adjusted for angle and height to give you maximum flexibility in positioning your display to fit your environment and comfort level. Move the screen closer to you, or push it out of your way when not in use. A 180° swivel and -40° to +90° tilt... More Info
Height Adjustable Stand 19" ~ 22"
- Height Adjustable Stand - Compatible with 19" ~ 22" monitors- VESA 100 x 100 and 75 x 75 mm- 4 in 1 Function: Height Adjustable 110mm / Tilt: -5°~ 19 ° / Pivot: 90° / Swivel 30° Left ~ 30° Right More Info