Structured Networking (2158 products)

QSFP28 - QSFP28, Passive Copper Direct Attach Cable, 1 m, Customer Kit

This Dell Networking Cable, 100GbE QSFP28 to QSFP28, Passive Copper Direct Attach Cable is used to link your fiber networking devices for high-speed, long-distance connectivity. This 1 m cable features an QSFP28 connector at one end and QSFP28 connector at the other end. - Provides the necessary link between fiber networking devices for high-speed, long-distance connectivity- Features an QSFP28 connector at one end and QSFP28 connector at the other end- Measures 1 m in lengthCompatibilityThis product is compatible with the following... More Info

10m LC-LC 9/125 OS1 Duplex Singlemode PVC Fibre Optic Cable (LSZH) - Yellow

Cost-effective solution that provides high bandwidth and transmission rates over longer distances. With LC to LC termination, this high quality fibre optic patch cable is specifically designed for Gigabit Ethernet applications.The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke and halogen emissions when the cable is exposed to extreme temperatures.This reduces the amount of harmful toxic and corrosive gases that cabling made with plastic materials would otherwise emit into the air during... More Info

DTE Male SS-DB60 V.35 3m Cable

Cisco pays special attention to its network accessories which are the foundation stone of the whole network system. Cisco cables, adapters and other accessories will never let you down and you can always rely on the superior quality and outstanding reliability. Cisco has a wide range of network cables that will fit even the most extraordinary demands. More Info

Audio cable, 2x RCA M to 3,5mm F stereo, 1.5m

This Booted Shielded Cat6a patch cable is ideal for use with 10GBase-T ports and equipment, such as network adapters, hubs, switches, routers, DSL/cable modems and patch panels, and will protect a high speed 10 Gigabit network connection from noise and electromagnetic interference. For voice/data/video distribution, this cable will handle bandwidth-intensive applications and drastically reduces both impedance and structural return loss (SRL). Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat6a component requirements.Each of the... More Info

StarTech.com 10m Single Mode Duplex Fiber Patch Cable - LC to SC OS1 Single...

Provide a high-performance link between fiber network devicesThe SMFIBLCSC10 10m LC to SC Single-Mode Duplex Fiber Cable features 9/125 micron fiber for high-speed, high bandwidth data transmissions over Gigabit Ethernet and Fiber Channel networks, with support for duplex single-mode applications.This LC-SC patch cable is housed in a LSZH (Low-Smoke, Zero-Halogen) flame retardant jacket, to ensure minimal smoke, toxicity and corrosion when exposed to high sources of heat, in the event of a fire – an ideal solution for use in industrial... More Info

48-Port 1U Rack-Mount STP Shielded Cat6a Feedthrough Patch Panel, RJ45 Ethernet

The N254-048-SH-6A 48-Port 1U Rack-Mount STP Shielded Cat6a Feedthrough Patch Panel meets or exceeds Cat6a specifications and works with USOC, T568A and T568B wiring to comply with industry standards. Fully rated for 10 Gbps Ethernet data transfer speeds, this low-profile patch panel manages and organizes the cabling in your high-density network. No 110 punchdown termination is required. Just plug your Cat6a cables into the 48 fully shielded RJ45 coupler jacks on both sides of the panel. The detachable cable management bar keeps patch cables... More Info

Cost-effective solution that provides high bandwidth and transmission rates over longer distances. With LC to LC termination, this high quality fibre optic patch cable is specifically designed for Gigabit Ethernet applications.The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke and halogen emissions when the cable is exposed to extreme temperatures.This reduces the amount of harmful toxic and corrosive gases that cabling made with plastic materials would otherwise emit into the air during... More Info

Duplex Singlemode 8.3/125 Fiber Patch Cable (SC/ST), 3M

Tripp Lite's 3-meter, singlemode duplex fiber optic SC/ST patch cable is manufactured from 8.3/125 zipcord fiber. The cable has ST connectors on one end, SC on the other, a PVC jacket, and is FDDI and OFNR rated. Duplex singlemode fiber is most commonly used in LAN applications.- Premium PVC 8.3/125 micron singlemode patch cables- Attenuation loss meets or exceeds the latest industry standards- Twice the bandwidth throughput of multimode cable - Manufactured from 8.3/125 duplex (zipcord) fiber- PVC jacket- Length: 5-meter. Connectors: 2 ST... More Info

2lines, 8.89 cm (3.5 ") , 396×162, 10/100BASE-T, PoE, White, 0.867kg

Increase Productivity with Clear CommunicationsDeploy reliable and highly secure voice communications with the Cisco IP Phone 7821. This full-featured phone is easy to use and easy on your budget. This endpoint supports wideband audio for superior voice communications quality and advanced IP telephony features to make your business calls more efficient and productive.The Cisco IP Phone 7821 is a two-line endpoint that is designed for information workers and managers. This phone is ideal for:- Customers who currently use traditional analog or... More Info

High-Density Synchronous/Asynchronous Cable 4-port EIA-232 DCE 3m

The Cisco asynchronous cable has the high-density connector on one end and eight RJ-45 plugs on the other. Connections to other equipment are made using RJ-45 to DB-25 adapters. More Info

HP Moonshot-180G Switch Module Kit

Is switch traffic and cabling a nightmare for you? The Moonshot 1500 Chassis comes with up to two HP Moonshot-180G Switch Modules each, so traffic is better managed, and units can be stacked for better resiliency. Each node is connected directly to the switch module via a single lane of high-speed fabric interconnect, providing a dedicated, low-latency 1 GbE bandwidth path to each node in the Moonshot System. These switches deliver high-density and low-power switching with Layer 2 and Layer 3 routing for ideal performance, delivered with the... More Info

Audio cable, 2x RCA Female - 1x 3.5mm Male, Stereo, 2m

This Booted Shielded Cat6a patch cable is ideal for use with 10GBase-T ports and equipment, such as network adapters, hubs, switches, routers, DSL/cable modems and patch panels, and will protect a high speed 10 Gigabit network connection from noise and electromagnetic interference. For voice/data/video distribution, this cable will handle bandwidth-intensive applications and drastically reduces both impedance and structural return loss (SRL). Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat6a component requirements.Each of the... More Info

StarTech.com StarTech.com Aqua OM4 Duplex Multimode Fiber – 1m / 3 ft – 100...

This fiber optic cable lets you connect 40GBase-SR4, 100GBase-SR10, SFP+ and QSFP+ transceivers in 40 and 100 Gigabit networks. The OM4 cable supports Vertical Cavity Surface Emitting Laser (VCSEL) and LED light sources and is backward compatible with your existing 50/125 equipment.This Aqua OM4 duplex multimode fiber cable is housed in a LSZH (Low-Smoke, Zero-Halogen) flame retardant jacket, to ensure minimal smoke, toxicity and corrosion when exposed to high sources of heat, in the event of a fire. It's ideal for use in industrial... More Info

Cat5e 350MHz Molded UTP Patch Cable (RJ45 M/M) - Black, 6.09 m (20-ft.)

Tripp Lite's 6.09 m (20-ft.) Black category 5e (Cat5e) patch cable has 2 standard RJ45 molded male connectors featuring integral strain relief. The cable is manufactured from PVC 4-pair stranded UTP and is rated for 350MHz/1Gbps communication. All cables are offered in a variety of lengths and colors for all category 5 (Cat5) and 5e cabling needs. Snagless category 5e patch cables are also available.- Premium cabling for Category 5 and 5e applications—rated for 350 MHz/1 Gbps communications- IEEE 802.3ab- PVC 4-pair stranded UTP- All cables... More Info

20m LC-LC 9/125 OS1 Duplex Singlemode PVC Fibre Optic Cable (LSZH) - Yellow

Cost-effective solution that provides high bandwidth and transmission rates over longer distances. With LC to LC termination, this high quality fibre optic patch cable is specifically designed for Gigabit Ethernet applications.The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke and halogen emissions when the cable is exposed to extreme temperatures.This reduces the amount of harmful toxic and corrosive gases that cabling made with plastic materials would otherwise emit into the air during... More Info