Add, replace or upgrade SFP modules on Gigabit fiber equipment
The SFPGLCLHSMST Cisco Compatible Gigabit Fiber SFP Transceiver Module SM/MM LC is built to comply with MSA (Multi-Sourcing Agreement) standards to offer a cost-effective way to add, replace or upgrade an SFP slot on your Gigabit fiber networking equipment or fiber media converter.
Supporting a 1000Base-LX/LH network with data rates up to 1.25 Gbps, this LC SFP/Mini-GBIC module can be installed into any fiber networking device with an MSA or Cisco compliant SFP port. The SFP transceiver supports both single-mode and multi-mode LC ports, with a single-mode distance of 10 km (6.2 mi.) and multi-mode distance of 550 m (1804 ft.). Delivering both convenience and scalability, this fiber transceiver is fully hot-pluggable, which enables you to install the module without interrupting network traffic or requiring a device reboot.
This 1310nm single-mode/multi-mode SFP module is compatible with the Cisco GLC-LH-SM transceiver. Also a perfect accessory for the StarTech.com PCI Express Open SFP NIC (PEX1000SFP2), or Gigabit POE Open SFP Media Converter (ET1110PSE) products.
Backed by a StarTech.com lifetime warranty and free lifetime technical support.
The StarTech.com Advantage
- Replace defective or damaged MSA or Cisco SFPs
- Extend your network connectivity up to 10km
Cable type |
Single-mode |
Data transfer rate (max) |
1250 Mbit/s |
Depth |
60 mm |
Duplex system |
Full, Half |
Fiber optic connector |
LC |
Height |
10 mm |
Hot-Plug support |
Yes |
Interface type |
SFP |
Maximum transfer distance |
10000 m |
Networking standards |
IEEE 802.3z |
Operating relative humidity range |
30 - 70 % |
Operating temperature range (T-T) |
0 - 70 °C |
SFP transceiver type |
LH |
Source data-sheet |
Icecat.biz |
Storage temperature range (T-T) |
-40 - 85 °C |
Wavelength |
1310 nm |
Weight |
18 g |
Width |
12 mm |
Specific References
- EAN13
- 0065030850643