shopping_basket
Are your enterprise data centers growing and requiring increased network performance? Increased workload demands are putting pressure on server I/O. The HP FlexFabric 10Gb 2-port 533FLR-T Adapter increases throughput for the HP ProLiant Gen8 DL and SL Server series by using the innovative HP FlexibleLOM form factor to offer dual-ports in a 10GBASE-T adapter configuration.
This is an affordable choice for workload-intensive computing environments, providing a reliable, high performance 10 GbE connectivity solution.
Accelerates Server Performance
- The HP FlexFabric 10Gb 2-port 533FLR-T Adapter boosts network performance with full line-rate 10 GbE throughput across all ports.
- Provides increased server performance by delivering full hardware offload for storage traffic.
Robust Virtualization Capabilities
- The HP FlexFabric 10Gb 2-port 533FLR-T Adapter delivers Single Root I/O Virtualization (SR-IOV) support to allow multiple operating systems to share a physical interconnect.
- Supports Vmware NetQueue and Microsoft VMQ technologies.
- Enhances network management and efficiency with support for VLAN tagging.
Streamlines Deployment and Management
- Makes Broadcom Ethernet solutions available across a wide range of HP server platforms.
- Unifies NIC and storage management using HP ProActive Insight architecture.
- Provides backward compatibility with existing 1GbE networks and low-cost CAT 6a UTP cabling, supporting distances up to 100 meters.
This is an affordable choice for workload-intensive computing environments, providing a reliable, high performance 10 GbE connectivity solution.
Accelerates Server Performance
- The HP FlexFabric 10Gb 2-port 533FLR-T Adapter boosts network performance with full line-rate 10 GbE throughput across all ports.
- Provides increased server performance by delivering full hardware offload for storage traffic.
Robust Virtualization Capabilities
- The HP FlexFabric 10Gb 2-port 533FLR-T Adapter delivers Single Root I/O Virtualization (SR-IOV) support to allow multiple operating systems to share a physical interconnect.
- Supports Vmware NetQueue and Microsoft VMQ technologies.
- Enhances network management and efficiency with support for VLAN tagging.
Streamlines Deployment and Management
- Makes Broadcom Ethernet solutions available across a wide range of HP server platforms.
- Unifies NIC and storage management using HP ProActive Insight architecture.
- Provides backward compatibility with existing 1GbE networks and low-cost CAT 6a UTP cabling, supporting distances up to 100 meters.
| Chipset | Broadcom BCM57810S |
| Connectivity technology | Wired |
| Data transfer rate (max) | 20000 Mbit/s |
| Ethernet LAN | Yes |
| Ethernet LAN (RJ-45) ports | 2 |
| Ethernet LAN (RJ-45) ports quantity | 2 |
| Ethernet LAN connection | Yes |
| Ethernet LAN data rates | 10,100,1000,10000 Mbit/s |
| Ethernet LAN data transfer rates | 10, 100, 1000, 10000 Mbit/s |
| Flash memory | 256 MB |
| Full duplex | Yes |
| Host interface | PCI |
| Interface | Ethernet |
| Internal | Yes |
| Networking standards | IEEE 802.1Q,IEEE 802.3,IEEE 802.3ad,IEEE 802.3x |
| Operating relative humidity (H-H) | 5 - 95 % |
| Operating relative humidity range | 5 - 95 % |
| Operating temperature (T-T) | 0 - 55 °C |
| Operating temperature range (T-T) | 0 - 55 °C |
| PCI Card form factor | full-height (low-profile) |
| Power consumption (typical) | 15.5 W |
| RoHS compliance | Yes |
Specific References
- EAN13
- 0887111292018
Hewlett Packard Enterprise 533FLR-T
FlexFabric 10Gb 2P 533FLR-T Adapter
£989.32
Tax excluded
FlexFabric 10Gb 2P 533FLR-T Adapter