Grey faceplate Ideal for installations that requires a high contrast between the mounting surface and the outlet (as specified in the Disibility Discrimination Act)

The Cisco® Fourth-Generation 1-, 2-, 4- and 8-PortT1/E1Multiflex Trunk Voice and WAN Network Interface Modules (NIMs) support data and voice applications on the Cisco 4451-X Integrated Services Routers (Figure 1). These cards combine WAN-interface-card (WIC), voice-interface-card (VIC), ISDN Primary Rate Interface (PRI), dial-access integration,...

Tripp Lite introduces it's new OM3 Laser-Optimized Multimode Fiber (LOMMF) "Aqua" cables, for use with 10Gb Ethernet applications. These new technology, 50/125um, LC/LC Fiber Optic cables, provide nearly four times the bandwidth over conventional 62.5um multimode fiber, with performance rivaling that of Singlemode cable, at a much reduced cost....

Tripp Lite's 2.13 m (7-ft.) Orange snagless category 5e (Cat5e) patch cable has 2 snagless RJ45 molded male connectors featuring integral strain relief. The cable is manufactured from PVC 4-pair stranded UTP and is rated for 350MHz/1Gbps communication. All cables are offered in a variety of lengths and colors for all category 5 (Cat5) and 5e...

Cisco pays special attention to its network accessories which are the foundation stone of the whole network system. Cisco cables, adapters and other accessories will never let you down and you can always rely on the superior quality and outstanding reliability. Cisco has a wide range of network cables that will fit even the most extraordinary...

This 6ft Cisco Console Cable/Rollover cable is a cost-effective replacement cable which enables you to connect your computer to your Cisco® router, server, or network equipment. This durable Cisco Console Cable is a direct replacement cable that conforms to the Yost Serial Device Wiring Standard.Expertly designed and constructed of only the...

Provide a high-performance link between fiber network devicesThe FIBLCSC2 2-meter (6.6ft) Multimode 62.5/125 Duplex Fiber Patch Cable is terminated with one LC (male) connector and one SC (male) connector, to provide the necessary connection between fiber networking devices for high-speed, long distance networks.To ensure optimum performance,...

Cables To Go's Cat6 crossover cables are perfect for distributing data, voice, video and connecting network switches and hubs without an uplink port to other switches and hubs. These 550MHz rated patch cables ensure that you always have the necessary throughput to handle bandwidth-intensive applications. Note:These cables are for 10/100 ethernet...

- Solid and reliable terminations for copper cabling featuring a minimum of 3 mm 50 micro-inch gold plated jack contacts;- Compatible with both 110 and Krone punch down tools;- Supports 22 to 26 AWG stranded and solid wire;- For use with unshielded twisted pair (UTP) Cat6 network cable;- Cat6 performance is in compliance with the ANSI/TIA/EIA...

The Dell Transceiver delivers fiber connectivity to extend the range of your network. Additionally, it provides a unique enhanced digital diagnostic monitoring interface, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power, and...

Connectix Category 6 UTP Patch Cable is designed for high speed LANs including Gigabit Ethernet applications. This cable is extremely flexible and ideal for making Cat 6 RJ45 Patch Leads. Supplied on a 500m Coils. Features: Suitable for Gigabit Ethernet applications LSZH outer sheath Stranded copper cores Highly flexible 100% Copper