shopping_basket
Cisco CAB-U-RJ45
On the 1604-R router, there is one ISDN BRI U interface with integrated NT-1 which requires an RJ-45 straight-through cable.The cable details are:-CAB-U-RJ45=.-Red Color Cable for ISDN BRI U.-RJ-45.-6 ft.
Cisco CAB-V35MT
A number of different standards defines the signaling over a serial cable (including EIA/TIA-232, X.21, V.35, EIA/TIA-449, EIA-530, and HSSI). Each standard defines the signals on the cable and specifies the connector at the end of the cable. The documentation for the device being connected should indicate the signaling standard used for that...
Cisco Serial Cable CAB-X21 FC
The CAB-X21FC serial cable is used in the Cisco 7000 family, Cisco 4000 series, Cisco 3600 series, Cisco 2500 series, Cisco 1600 series, Cisco access servers, and AccessPro PC cards. This cable has a male DB-60 connector on the Cisco end and a female DB-15 connector on the network end.
Cisco X.21 CABLE DTE MALE 10 FT
The CAB-X21MT serial cable is used in the Cisco 7000 family, Cisco 4000 series, Cisco 3600 series, Cisco 2500 series, Cisco 1600 series, Cisco access servers, and AccessPro PC cards. This cable has a male DB-60 connector on the Cisco end and a male DB-15 connector on the network end.
Cisco 10GBASE-CU SFP+ Cable 3 Meter
Cisco SFP+ Copper Twinax cables are suitable for very short distances of up to 10m. Twinax cables offer a highly cost-effective way to connect within racks and across adjacent racks.
Cisco 10GBASE-CU SFP+ Cable 5 Meter
Cisco SFP+ Copper Twinax cables are suitable for very short distances of up to 10m. Twinax cables offer a highly cost-effective way to connect within racks and across adjacent racks.
Cisco 3750X Stack
The Cisco StackPower cables are thick but flexible, and they carry power as well as a data signal to provide a communications channel among the switches in the power stack. StackPower and XPS cables are keyed and have colored bands on the ends to help you understand what cable plugs into what switch or XPS.A StackPower cable has colors bands on...
Cisco Cable 8 Lead Octal 68 pin - 8 RJ45
- CAB-OCTAL-ASYNC cables use a 68-pin connector & breakout cable & provideeight RJ-45 rolled cable asynchronous ports on each 68-pin connector- Allows to connect each RJ-45 rolled cable asynchronous port to the consol or Aux port of a device
Cisco 1.8m ISDN BRI S/T
Orange Color Cable for ISDN BRI S/T, RJ-45, 6 ft.
Cisco CAB-SFP-50CM
The Catalyst 3560 switch supports the SFP module patch cable, a 1/2 meter, copper, passive cable with SFP module connectors at each end. The patch cable can connect two Catalyst 3560 switches in a cascaded configuration.
Cisco 3m V.35 DTE Cable
There are two types of devices that can communicate over a serial interface: DCE and DTE. A DCE provides a physical connection to a network and forwards traffic. A DTE connects to a network through a DCE device. Typically, a DTE device is connected to a DCE device (or vice versa) rather than another DTE device.Check the documentation that ships...