shopping_basket
Cisco Catalyst® 2960-L Series Switches are fixed-configuration, Gigabit Ethernet switches that provide entry-level enterprise-class Layer 2 access for branch offices, conventional workspaces, and out-of-wiring closet applications. Designed for operational simplicity to lower total cost of ownership, they enable secure, and energy-efficient business operations with a range of Cisco IOS® Software features.
- Increase flexibility by extending your LAN beyond the wiring closet in a slim and noiseless body
- Improve experiences by offering enterprise-class switching and Cisco Catalyst quality and support at a great value.
- Reduce operating cost by simplifying management over wire or air, and lowering energy consumption through Cisco EnergyWise® technology.
- 8, 16, 24, or 48 Gigabit Ethernet ports with line-rate forwarding.
- Power over Ethernet Plus (PoE+) support with up to 370W of power budget.
| AC input frequency | 50 - 60 Hz |
| AC input voltage | 110 - 240 V |
| Access Control List (ACL) | Y |
| Auto MDI/MDI-X | Y |
| Basic switching RJ-45 Ethernet ports quantity | 48 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Broadcast storm control | Y |
| Built-in processor | Y |
| Console port | RJ-45 |
| Copper ethernet cabling technology | 10BASE-T,100BASE-TX,1000BASE-T |
| Depth | 292 mm |
| Electromagnetic compatibility | 47CFR Part 15 (CFR 47) Class A, AS/NZS CISPR22 Class A, CISPR22 Class A, EN55022 Class A, ICES003 Class A, VCCI Class A, EN61000-3-2, EN61000-3-3, KN22 Class A, CNS13438 Class A |
| Flash memory | 256 MB |
| Form factor | 1U |
| Full duplex | Y |
| Height | 44 mm |
| IGMP snooping | Y |
| Input current | 0.64 A |
| Internal memory | 512 MB |
| Jumbo frames support | Y |
| LED indicators | Activity,Link,PoE,Speed,System |
| MAC address table | 16000 entries |
| Management protocols | SNMPv3, Telnet, RMON |
| Mean time between failures (MTBF) | 437970 h |
| MIB support | Y |
| Multicast support | Y |
| Networking standards | IEEE 802.1D,IEEE 802.1ab,IEEE 802.1af,IEEE 802.1p,IEEE 802.1s,IEEE 802.1w,IEEE 802.1x,IEEE 802.3ad,IEEE 802.3ae,IEEE 802.3az,IEEE 802.3u,IEEE 802.3x,IEEE 802.3z |
| Non-operating altitude | 0 - 4500 m |
| Number of VLANs | 4094 |
| Operating altitude | 0 - 3000 m |
| Operating relative humidity (H-H) | 5 - 90 % |
| Operating temperature (T-T) | -5 - 40 °C |
| Power consumption (typical) | 81.6 W |
| Power over Ethernet (PoE) | Yes |
| Power over Ethernet plus (PoE+) ports quantity | 48 |
| Processor frequency | 800 MHz |
| Quality of Service (QoS) support | Y |
| Rack mounting | Yes |
| Safety | UL 60950-1 Second Edition, CAN/CSA-C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, AS/NZS 60950-1 |
| Security algorithms | SNMP,SSH |
| Spanning tree protocol | Y |
| SSH/SSL support | Y |
| Storage relative humidity (H-H) | 5 - 95 % |
| Storage temperature (T-T) | -25 - 70 °C |
| Switch layer | L2 |
| Switch type | Managed |
| Switching capacity | 104 Gbit/s |
| Total Power over Ethernet (PoE) budget | 370 W |
| VLAN support | Y |
| Width | 445 mm |
| ARP inspection | Y |
| Installed SFP modules quantity | 4 |
| Product colour | Grey |
| Virtual LAN features | Private VLAN |
| DHCP features | DHCP server,DHCP client |
Specific References
- EAN13
- 0889728197809
Cisco 48 port Gigabit full PoE capable Enterprise level Layer 2 Managed switch
Catalyst 2960-L, PoE+, RJ45 and USB console, ARMv7 800 MHz, 512 MB, 256 MB Flash memory, 4094 VLAN IDs, Jumbo
£1,433.33
Tax excluded
Catalyst 2960-L, PoE+, RJ45 and USB console, ARMv7 800 MHz, 512 MB, 256 MB Flash memory, 4094 VLAN IDs, Jumbo