shopping_basket
Cisco Catalyst 2960-L Series Switches are fixed-configuration, Gigabit Ethernet switches that provide entry-level enterprise-class Layer 2 access for branch offices, conventional workspaces, and out-of-wiring closet applications. Designed for operational simplicity to lower total cost of ownership, they enable secure, and energy-efficient business operations with a range of Cisco IOS® Software features.
| AC input frequency | 50/60 Hz |
| AC input voltage | 120 - 230 V |
| Access Control List (ACL) | Y |
| Auto MDI/MDI-X | N |
| Basic switching RJ-45 Ethernet ports quantity | 8 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Broadcast storm control | Y |
| Built-in processor | Y |
| Cable types supported | Cat5e |
| Cables included | AC |
| Certification | UL, CAN/CSA, TUV/GS, CE, NOM, FCC, EN, AS/NZS, MIC, GOST, EMC |
| Console port | RJ-45 |
| Copper ethernet cabling technology | 10BASE-T,100BASE-TX,1000BASE-T |
| Depth | 215 mm |
| Electromagnetic compatibility | 47CFR Part 15 (CFR 47) Class A, AS/NZS CISPR22 Class A, CISPR22 Class A, EN55022 Class A, ICES003 Class A, VCCI Class A, EN61000-3-2, EN61000-3-3, KN22 Class A, CNS13438 Class A |
| Ethernet LAN data rates | 10,100,1000 Mbit/s |
| Flash memory | 256 MB |
| Form factor | 1U |
| Full duplex | Y |
| Height | 45 mm |
| IGMP snooping | Y |
| Input current | 0.22 A |
| Internal memory | 512 MB |
| IP routing | Y |
| Jumbo frames support | Y |
| LED indicators | Activity,Link,PoE,Speed,System |
| MAC address table | 8000 entries |
| Management protocols | SNMPv3, Telnet, RMON |
| Manual | Y |
| Mean time between failures (MTBF) | 2448133 h |
| Memory type | DRAM |
| MIB support | BRIDGE-MIB, CISCO-CDP-MIB, CISCO-CLUSTER-MIB, CISCO-CONFIG-MAN-MIB, CISCO-ENTITY-FRU-CONTROL-MIB, CISCO-ENVMON-MIB, CISCO-FLASH-MIB, CISCO-FTP-CLIENT-MIB, CISCO-HSRP-MIB, CISCO-HSRP-EXT-MIB, CISCO-IGMP-FILTER-MIB, CISCO-IMAGE-MIB, CISCO-IP-STAT-MIB, CISCO |
| Multicast support | Y |
| Networking standards | IEEE 802.1D,IEEE 802.1ab,IEEE 802.1af,IEEE 802.1p,IEEE 802.1s,IEEE 802.1w,IEEE 802.1x,IEEE 802.3ad,IEEE 802.3ae,IEEE 802.3az,IEEE 802.3u,IEEE 802.3x,IEEE 802.3z |
| Non-operating altitude | 0 - 4500 m |
| Number of power supply units | 1 |
| Number of VLANs | 4094 |
| Operating altitude | 0 - 3000 m |
| Operating relative humidity (H-H) | 5 - 90 % |
| Operating temperature (T-T) | -5 - 40 °C |
| Power consumption (typical) | 14.9 W |
| Power supply included | Y |
| Processor frequency | 800 MHz |
| Quality of Service (QoS) support | Y |
| Rack mounting | Yes |
| Redundant power supply (RPS) support | Y |
| Routing protocols | HSRP,IP,RIP-1,RIP-2,RIPng |
| Security algorithms | SNMP,SSH |
| Spanning tree protocol | Y |
| SSH/SSL support | Y |
| Static port security | Y |
| Storage relative humidity (H-H) | 5 - 95 % |
| Storage temperature (T-T) | -25 - 70 °C |
| Switch layer | L2 |
| Switch type | Managed |
| Switching capacity | 20 Gbit/s |
| Switching protocols | UL 60950-1 Second Edition, CAN/CSA-C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, AS/NZS 60950-1 |
| User guide | Y |
| VLAN support | Y |
| Width | 270 mm |
| ARP inspection | Y |
| Installed SFP modules quantity | 2 |
| Power connector | AC-in jack |
| Product colour | Grey |
| Virtual LAN features | Private VLAN |
| DHCP features | DHCP client,DHCP server |
Cisco 2960-L, Refurbished
WS-C2960L-8TSLL-RF, 1U, 8 x 10/100/1000 + 2 x SFP, AC 120/230 V ( 50/60 Hz ), Refurbished
£428.76
Tax excluded
WS-C2960L-8TSLL-RF, 1U, 8 x 10/100/1000 + 2 x SFP, AC 120/230 V ( 50/60 Hz ), Refurbished