Active filters

Cisco 2.4 GHz Aironet Triple Omni Antenna

This antenna was specifically designed for the Cisco Aironet 1250 Series. To support the 2.4-GHz IEEE 802.11n draft 2.0 radio modules with MIMO technology, the 2.4-GHz ceiling omnidirectional antenna was developed. It contains three antenna elements in a single white flush mount enclosure, providing an aesthetically pleasing option for...
£147.40
Tax excluded
Out of Stock

Cisco Lightning Arrestor

Overvoltage transients can be created through lightning static discharges, switch processes, direct contact with power lines, or through earth currents. The Cisco Aironet AIR-ACC245LA-R Lightning Arrestor limits the amplitude and duration of disturbing interference voltages and improves the overvoltage resistance of in-line equipment, systems,...
£184.89
Tax excluded
Out of Stock

Cisco AIR-ANT2524DW-R

The Cisco Aironet high-performance, dual-band dipole antenna. The antenna operates in both the 2.4-GHz and 5-GHz frequency bands and is designed for use with Cisco Aironet 2.4-GHz and 5-GHz radio products that have dual-band reverse-polarity TNC (RP-TNC) antenna ports. The antenna has a nominal gain of 2 dBi in the 2.4-GHz frequency band and 4...
£33.70
Tax excluded
In Stock

Cisco Multiband Swivel-Mount Dipole Omni-directional Antenna

The AIR-ANTM2050D-R antenna operates in the 2.4- and 5-GHz bands, and is designed for use with spatial-diversity access point (AP) systems. The AIR-ANTM2050D-R antenna is compatible with Cisco 802.11a/b/g radio products using a reverse-polarity threaded Neill-Concelman (RP-TNC) connector.
£71.47
Tax excluded
Out of Stock

Cisco Aironet 4-dBi Omnidirectional Antenna

The antenna is designed specifically for use with pre-802.11n and 802.11n 3-antenna access points. The antenna operates in the 5-GHz frequency range and is designed for use only in an indoor office environment. The antenna assembly consists of three radiating elements, each fed with its own coaxial cable.
£147.40
Tax excluded
Out of Stock

Cisco Single Unit Antenna Extension Base

The Cisco 3G-AE015-R single-port antenna base is designed for use with portable antennas operating at frequencies up to 6 GHz that connect to 3G wireless high-speed WAN interface cards (HWICs) using a threaded Neill-Concelman (TNC) male connector. This antenna base unit, ordered separately, has 15 feet of plenum LMR-195 cable and can be used...
£120.72
Tax excluded
Out of Stock

Cisco AIR-ANT25137NP-R

Designed for high density wireless applications such as stadiums and arena. Wall mounted patch antenna with 6 plenum rated pigtail cables, 36 inches each and 6 RP-TNC connectors. Only certified for use with AP3502P access point.
£738.19
Tax excluded
Out of Stock

Cisco AIR-ANT2524V4C-R

Ceiling mount omnidirectional antenna - Designed for use indoor, this antenna comes with ceiling mount hardware. It has 4 plenum rated pigtail cables, 3 foot each, with four RP-TNC connectors.
£367.20
Tax excluded
Out of Stock

Cisco AIR-ANT25137NP-R4

Designed for high density wireless applications such as stadiums and arena. Wall mounted patch antenna with 6 plenum rated pigtail cables, 36 inches each and 6 RP-TNC connectors. Only certified for use with AP3502P access point.
£2,148.07
Tax excluded
Out of Stock

Cisco AIR-ANT2544V4M-R

The next generation of Cisco® Aironet® 802.11naccess points – the Cisco Aironet 1600e, 2600e, 3600e Series and 1550 Series – requires the use of dual-band external antennas to make them fully functioning units. As these access points take greater advantage of the multiple-input multiple-output (MIMO) features supported under the 802.11n...
£594.77
Tax excluded
Out of Stock

Cisco AIR-ANT2547V-N-HZ

Dual-Band Omnidirectional Antenna for Cisco Aironet 1550 Series Access Points
£228.01
Tax excluded
Out of Stock