Our range of RJ45 Cat 5e Patch Lead is manufactured to exceed all current enhanced Cat 5e specifications. Each patch cable is tested to ensure quality and performance. Manufactured with a moulded style boot which provides strain relief and prevents the cable becoming loose from the plug. The LSZH Leads have a latch protection boot on each RJ45...

An extensive range of professional grade power distribution units designed specifically for the 19" electronic enclosure markets. Offered with a comprehensive range of IEC320 C13 socket choice to suit wall mounting or floor standing cabinets.

Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. User-defined alarm thresholds mitigate risk with real-time local and remote alerts to warn of potential circuit overloads. Metered Rack PDUs provide power utilization data to allow Data Center Managers to make informed...

Fits slim line Home Cabinet (009-000-004-63) The shelf is fixed in the same way to the profiles as a patch panel would be. The 'dish' size is 158mm width and 105mm deep

The RK119WALLV 1U 19in Steel Vertical Wall Mount Equipment Rack Bracket offers a versatile storage solution allowing rackmount equipment (Network devices, power strips, patch panels) to be mounted vertically (flush with wall) to save space. Alternatively, the 1U bracket can be installed horizontally under a desk, making it easy to access...

Toolless Hook and Loop Cable Managers (Qty 10)Comprehensive selection of accessories designed to organize power or data cables within a rack environment.Physical:- Net Weight 0.04 KG;- Maximum Height 21.00 mm;- Maximum Width 38.00 mm;- Maximum Depth 12.00 mm;- Shipping Weight 0.16 KG;- Shipping Height 81.00 mm;- Shipping Width 179.00 mm;-...

Eliminates the pain involved in determining where to install rack-mount devices within a rack by labeling each vertical mounting rail with the actual U-height position.Stabilizations plates can either be mounted internally to conserve floor space or externally

This cable connects an IEC C19 outlet to an IEC 309-16A connector. It can be used as a means to plug in a 16A IEC 309 plug into a Rack PDU with IEC C19 outlets.

APC Basic Rack PDU , Input: 400V 3PH , Input Connections: IEC 309 16A 3P+N+PE , Cord Length: 3 feet ( 0.91 meters ) , Output: 230V , Output Connections: IEC 320 C13,IEC 320 C19.- Low Cost Power Distribution.- Vertical mounting capability.- Toolless mounting capability.- Multi-branch power input.

The Connectix 2020 Series FTP Patch Panel is an alternative to the Standard Enhanced Category 5e FTP Panel. It offers the same Enhanced Category 5e performance as the standard panel but has been designed to present the cable termination IDCs horizontally on a tray at the rear of the panel, making termination and cable management easier. All...

Field-replaceable NMC Integrated Network Management Card/Display Module can be replaced in the field to minimize downtime disruption in the unlikely event of a failure. High Retention Outlets With no special power cords required, high retention outlets provide up to twice the holding force to reduce risk of accidental disconnect on 9000...