Tripp Lite Video Splitters

There are 51 Tripp Lite Video Splitters products.
per page
Showing 1 - 15 of 51 items
  • 2x2 DVI over Cat5 / Cat6 Matrix Splitter Switch, Video...

    £160.30
    £192.36 Inc VAT.

    Tripp Lite's B140-202, 2X2 DVI Matrix Switch allows two DVI Single-Link video sources to be routed to one or two RJ45 outputs and extended up to 45.72 m (150-ft.) @ 1920x1200 using Active (powered) Receiver, or up to 15.24 m (50-ft.) @ 1920x1200 using Passive (non-powered) Rec. Switching between sources is done manually or with included remote control. Additional monitors can be added beyond the typical two by using Tripp Lite B140-110 daisy-chain Receivers - up to 4 monitors per channel.- Share two DVI sources between two monitors- Supports...

    £160.30
    Out of Stock
    More Info
  • 2-Port Dual Display DVI over Cat5 / Cat6 Extender...

    £300.56
    £360.68 Inc VAT.

    Tripp Lite's B140-002-DD takes in two PC DVI source video signals, and splits each to two remote monitors. Passive, non-powered Receivers allow distances up to 15.24 m (50-ft.) @ 1920x1200 resolution, or 30.5 m (100-ft.) @ 1024x768 resolution, over solid conductor Cat6 cable. Active, powered Receivers extend the distance to 45.72 m (150-ft.) @ 1920x1200, and 60.96 m (200-ft.) @ 1024x768 (receivers purchased separately). Additional monitors can be daisy-chained (up to 3) on each channel, allowing four monitors per channel, by using Tripp Lite...

    £300.56
    Out of Stock
    More Info
  • 2-Port DisplayPort 1.2 Multi-Stream Transport (MST) Hub,...

    £253.81
    £304.57 Inc VAT.

    Get everyone’s attention by broadcasting awesome messages in ultra-high definition video! With Tripp Lite's B156-002 2-Port Multi-Display Video Splitter/Expander, you can split or expand a single DisplayPort signal into two separate signals and display them on two DisplayPort monitors using standard DisplayPort cables (Tripp Lite P580-Series or P583-Series). You can display the same image on each monitor, extend the desktop across them, or display in video wall mode where monitors are combined to display as one, enlarged monitor. The...

    £253.81
    Out of Stock
    More Info
  • 2-Port VGA with Audio over Cat5/Cat6 Extender Splitter,...

    £97.06
    £116.48 Inc VAT.

    Tripp Lite's B132-002A-2 allows you to split a single VGA Video and Audio signal into 2. Along with a B132-100A or B132-100A-WP-1 remote receiver unit, you can extend a 1920 x 1440 (60Hz) Video and Audio signal up to 152 m (500-ft.), or a 1024 x 768 (60Hz) Video and Audio signal up to 305 m (1,000-ft.), when using 24Awg, Solid Wire Cat5e/6 cable, such as Tripp Lite's N022-01K-GY (Cat5) and N222-01K-GY (Cat6).The range and number of monitors/speakers can be further expanded by adding B132-110A repeater units. Connect up to 4 remote units in a...

    £97.06
    Out of Stock
    More Info
  • 4-Port VGA over Cat5/Cat6 Extender Splitter, Box-Style...

    £160.30
    £192.36 Inc VAT.

    Tripp Lite's B132-004-2 allows you to split a single VGA signal into 5 (1 local, 4 remote). Increase the number of displays to up to 25 (1 local, 24 remote) by daisy-chaining up to six B132-004-2 units together. Along with a B132-100-1 or B132-100-WP-1 remote receiver unit, you can extend a 1920 x 1440 (60Hz) signal up to 152 m (500-ft.), or a 1024 x 768 (60Hz) signal up to 305 m (1,000-ft.), when using 24Awg, Solid Wire Cat5e/6 cable, such as Tripp Lite's N022-01K-GY (Cat5) and N222-01K-GY (Cat6). The range and number of monitors can be...

    £160.30
    Out of Stock
    More Info
  • 4-Port HDMI Splitter for Video and Audio, 1920 x 1200 at...

    £120.20
    £144.24 Inc VAT.

    Tripp Lite's B118-004, 4-Port HDMI Splitter allows the digital signal from a Blu-Ray player or other HDMI device to be displayed on four HDMI displays. Connect a DVI-D Single Link display using an HDMI to DVI adapter, such as Tripp Lite's P566-Series cables. Installation is quick and simple, with no software or drivers to install. Locate your HDMI source up to 13 ft. (4 m.) from the splitter, and the splitter up to 16 ft. (5 m.) from a display, for a max distance of 29 ft. (9 m.) between source and display. Multiple splitters can be cascaded...

    £120.20
    Out of Stock
    More Info
  • HDMI over Dual Cat5 / Cat6 Extender Kit, In-Line...

    £126.91
    £152.29 Inc VAT.

    Tripp Lite's HDMI Over Dual Cat5 Extender Kit is the perfect solution for those who need to extend a HDMI signal over a long distance over two Cat5/6 cables. When using 24Awg, Solid Wire Cat6 cable, a 1080p @ 24Hz (or 1920 x 1200) signal can be extended up to 45.72 m (150-ft.) from the source. When using 24Awg, Solid Wire Cat6 cable, a 3D signal can be extended up to 38.1 m (125-ft.) When using 24Awg, Solid Wire Cat5 cable, a 1080p @ 24Hz (or 1920 x 1200) signal can be extended up to 30.5 m (100-ft.) from the source. When using 24Awg, Solid...

    £126.91
    Out of Stock
    More Info
  • VGA with Audio over Cat5/Cat6 Extender, Box-Style...

    £90.99
    £109.19 Inc VAT.

    Tripp Lite's B132-100A works with a B132-002A-2 or B132-004A-2 local transmitter unit to extend a 1920 x 1440 (60Hz) Video and Audio signal up to 152 m (500-ft.), or a 1024 x 768 (60Hz) Video and Audio signal up to 305 m (1,000-ft.) 24Awg, Solid Wire Cat5e/6 cable, such as Tripp Lite's N022-01K-GY (Cat5) and N222-01K-GY (Cat6), is required to achieve maximum distance and resolution. For optimal image quality between 152 m (500-ft.) and 305 m (1,000-ft.), use Zero-Skew cable, such as Tripp Lite P524-01K. Features built-in Equalization and...

    £90.99
    Out of Stock
    More Info
  • 4-Port DVI Splitter with Audio and Signal Booster,...

    £176.32
    £211.58 Inc VAT.

    With Tripp Lite's 4-Port DVI + Audio Splitter, you can transmit a DVI-D Single Link video signal and 3.5 mm. audio signal to four sets of monitors and speakers. Supports DVI Single Link computer video resolutions up to 1920 x 1200, and HD resolutions up to 1080p. The unit is HDCP, EDID, and DDC compatible. A built-in signal booster allows you to extend the distance between the splitter and connected monitors past the 16 ft. (5 m.) distance limitation. For source video resolutions anywhere from 1600 x 1200 @ 60Hz to 1920 x 1200 @ 60Hz - The...

    £176.32
    Out of Stock
    More Info
  • 2-Port HDMI over Cat5 / Cat6 Extender / Splitter,...

    £173.65
    £208.38 Inc VAT.

    The B126-002 2-Port HDMI over Cat5/Cat6 Extender/Splitter works with Tripp Lite B126-Series remote receivers to split a single HDMI audio/video signal into two separate signals. It’s ideal for digital signs, trade shows, presentations, retail settings and other applications where the video source is located farther than conventional cables allow or that require multiple displays connected to one source. It uses HDMI cable (see Tripp Lite’s P568-Series) to connect to the source and Cat5e/6 cable to transmit to the remote monitors (for best...

    £173.65
    Out of Stock
    More Info
  • HDMI over Cat5/6 Active Extender Kit, Box-Style...

    £227.08
    £272.49 Inc VAT.

    The B126-1A1 HDMI over Cat5/Cat6 Active Extender Kit includes a transmitter unit and a receiver unit that work in tandem to extend an HDMI signal to a projector, monitor or television. The kit is ideal for digital signs, trade shows, presentations, classrooms, churches, retail settings and other applications where the source is located farther than conventional cables allow. HDMI cable (see Tripp Lite’s P568-Series) connects a monitor and the audio/video source to the transmitter’s HDMI ports and another monitor to the receiver. Cat5e/6...

    £227.08
    Out of Stock
    More Info
  • 4-Port Component Video + Stereo Audio over Cat5 / Cat6...

    £133.58
    £160.30 Inc VAT.

    Tripp Lite's B136-004 takes a single Component Video and Stereo Audio signal and splits it to five (1 local, 4 remote). When used in conjunction with a B136-100 remote unit, you can transmit a Component Video ( YPbPr ) and Stereo Audio signal from any DVD player, PS3, or Cable/Satellite device to up to four displays over a single CAT5, CAT5E, or CAT6 cable. A 1080i (60Hz) Component Video and Stereo Audio signal can be extended up to 91.44 m (300-ft.) when using 24Awg, Solid Wire UTP cable (Tripp Lite N202-Series); or, up to 121.9 m (400-ft.)...

    £133.58
    Out of Stock
    More Info
  • Component Video with Stereo Audio over Cat5 / Cat6...

    £52.06
    £62.47 Inc VAT.

    Tripp Lite's B136-101 Component Video + Stereo Audio extender kit comes with both local and remote units, allowing you to place a TV, Projector, etc., up to 213.36 m (700-ft.) away from the source. A 1080i (60Hz) Component Video and Stereo Audio signal can be extended up to 91.44 m (300-ft.) when using 24Awg, Solid Wire UTP cable (Tripp Lite N202-Series); or, up to 121.9 m (400-ft.) when using Zero-Skew UTP cable (Tripp Lite P524-01K). A 480p (60Hz) Component Video and Stereo Audio signal can be extended up to 152.4 m (500-ft.) when using...

    £52.06
    Out of Stock
    More Info
  • 4-Port DVI over Cat5/Cat6 Extender Splitter, Video...

    £240.43
    £288.52 Inc VAT.

    The B140-004 transmits a DVI-D Single-Link signal to four monitors up to 61 m (200-ft.) away using a single Cat5e/6 patch cable. To achieve maximum distance and resolution, use 24AWG Solid Wire Cat5e/6 cable (Tripp Lite's N202-Series). An additional DVI port is provided for the connection of a local monitor. This local DVI port can also be used to daisychain up to 3 units together, allowing for the connection of up to 13 monitors (12 remote, 1 local). Mounting hardware is included that allows the unit to be rackmounted, wallmounted or pole...

    £240.43
    Out of Stock
    More Info
  • VGA over Cat5/Cat6 Extender, Box-Style Receiver,...

    £76.44
    £91.73 Inc VAT.

    Tripp Lite's B132-100-1 works with a B132-002-2 or B132-004-2 local transmitter unit to extend a 1920 x 1440 (60Hz) video signal up to 152 m (500-ft.), or a 1024 x 768 (60Hz) video signal up to 305 m (1,000-ft.) 24Awg, Solid Wire Cat5e/6 cable, such as Tripp Lite's N022-01K-GY (Cat5) and N222-01K-GY (Cat6), is required to achieve maximum distance and resolution. For optimal image quality between 152 m (500-ft.) and 305 m (1,000-ft.), use Zero-Skew cable, such as Tripp Lite P524-01K. Features built-in Equalization and Gain controls to adjust...

    £76.44
    Out of Stock
    More Info
Showing 1 - 15 of 51 items

Direct Find

Manufacturer
Maximum operating distance
Video port type

Categories

Untitled Document

Manufacturers