Branded Cabinet Accessories (379 products)

Bracket Kit, Zero U PDU, HP

Cord retention brackets and vertical-mount bracket kits to complete rack power distribution solutions.- Multi-vendor equipment compatibility.- Vertical mounting capability. More Info

2U to 9U Tower Stand Kit for select Rack-Mount UPS Systems

Tripp Lite's 2-9USTAND tower-kit accessory offers a convenient method of installing a Tripp Lite rack/tower UPS systems in a small-footprint upright tower configuration. Pair of adjustable tower stands securely support single or multiple rackmount UPS, battery packs and other accessories in 2U to 9U widths. Expands from 10U to 14U with the purchase of an additional set of 2-9USTANDS. Compatible with Tripp Lite SmartOnline and SmartPro rack/tower UPS models specifying the use of this accessory.● Supports Tripp Lite rack/tower UPS systems in... More Info

Bracket Accessory - enables Vertical Installation of 1U PDUs, Power Strips...

Tripp Lite's PDUSIDEBRKT enables secure vertical installation of select 1U PDUs, Power Strips and Surge Suppressors in SmartRack enclosures.Compatible with Tripp Lite models PDU1215, PDU1220, PDU1220T, PDU1230, PDU12IEC, PDU2430, PDUMH15, PDUMH20, PDUNV, RS-1215, RS-1215-20, RS-1215-20T, RS-0615R, RS-0615F, IBAR12, ISOBAR12ULTRA, IBAR12-20ULTRA, DRS-1215 and other products specifying compatibility with this mounting accessory. See owner's manual for installation information.● Enables secure vertical installation of select 1U PDUs, Power... More Info

SmartRack 1U Horizontal Cable Manager - Finger Duct with Cover

Batteries not Required to OperateTripp Lite's SmartRack SRCABLEDUCT1U helps eliminate cable stress for your rack enclosure cabinet. The 1U 19-inch horizontal cable manager (finger duct with cover) organizes cables within the SmartRack enclosure or open rack. Required mounting hardware is included. - 1U 19-inch Horizontal Cable Manager -finger duct with cover - Helps eliminate cable stress - Organizes cables within SmartRack enclosure or open rack - Required mounting hardware included - Cold rolled steel with black finish - 1U 19 inch... More Info

SmartRack 1.83 m (6-ft.) Vertical Cable Manager - Double Finger Duct with...

Batteries not Required to OperateTripp Lite's SmartRack SRCABLEDUCTVRT helps eliminate cable stress by organizing the cables within the SmartRack enclosure or open rack cabinet. The vertical cable manager (finger duct with cover) is 1.83 m (6-ft.) high and split into two 0.91 m (3-ft.) sections to allow for multiple installation options. SRCABLEDUCTVRT offers toolless button mounting. - Vertical Cable Manager, 1.83 m (6-ft.), finger duct with cover - Split into two 0.91 m (3-ft.) section to allow for multiple installation options - Helps... More Info

SmartRack 10-ft. x 1-ft. (3 m x 0.3 m) Cable Ladder, 2 sections -...

Tripp Lite's SmartRack SRCABLELADDER helps eliminate cable stress by organizing cables outside of the SmartRack Enclosure or Open Frame Rack. The cable ladder is 12" wide and 3.05 m high. It ships in two convenient 1.52 m sections for easy shipping, storage and assembly. The SRCABLELADDER can be installed parallel or perpendicular to an enclosure. A grounding stud is provided to allow tie-in to the enclosure and facility ground. Toolless assembly and mounting on the SmartRack enclosure's top panel allows the cables to be safely routed... More Info

SmartRack 2U Horizontal Cable Manager - Flexible ring type

Tripp Lite's SmartRack SRCABLERING2U fits any standard 19" rack and helps eliminate cable stress for your rack enclosure cabinet. The 2U 19-inch horizontal cable manager (flexible ring type) organizes cables within the SmartRack enclosure or open rack. Required mounting hardware is included.● Tripp Lite's SmartRack SRCABLERING2U fits any standard 19" rack and helps eliminate cable stress for your rack enclosure cabinet● 2U 19-inch horizontal cable manager (flexible ring type) organizes cables within the SmartRack enclosure or open rack●... More Info

SmartRack 6-ft. (1.8 m) Vertical Cable Manager - Flexible ring type &...

Tripp Lite's SmartRack SRCABLERINGVRT helps eliminate cable stress by organizing the cables within the SmartRack enclosure or open rack cabinet. The vertical cable manager (flexible ring type) is 1.83 m (6-ft.) high and split into two 0.91 m (3-ft.) sections to allow for multiple installation options. SRCABLERINGVRT offers toolless button mounting. ● Tripp Lite's SmartRack SRCABLERINGVRT helps eliminate cable stress by organizing the cables within the SmartRack enclosure or open rack cabinet ● The vertical cable manager (flexible ring type)... More Info

SmartRack Roof-Mounted Cable Trough - Provides cable routing and power/data...

Tripp Lite's SmartRack SRCABLETRAY safely routes cables across the top of an enclosure. When cabinets are lined in a row, these trays create a dedicated path for cables helping to eliminate cable stress. The SRCABLETRAY organizes cables outside of the SmartRack enclosure. It offers toolless mounting to the top of the rack panel and a grounding stud is provided to allow tie-in to the enclosure and the facility ground.● Tripp Lite's SmartRack SRCABLETRAY safely routes cables across the top of an enclosure● When cabinets are lined in a row,... More Info

SmartRack Roof-Mounted Cable Trough Vertical Expansion Plates - Requires...

Tripp Lite's SmartRack SRCABLETRAYEXP adds an additional level of cable routing to the SRCABLETRAY (required part). When used with the SRCABLETRAY these expansion plates allow dedicated, separate paths for power, data and fiber cables. The SRCABLETRAYEXP helps eliminate cable stress by organizing cables outside of the SmartRack enclosure. Convenient, toolless mounting on the top panel of the SmartRack enclosure.● Tripp Lite's SmartRack SRCABLETRAYEXP adds an additional level of cable routing to the SRCABLETRAY (required part)● When used with... More Info

SmartRack Rolling Caster Kit, 4 pack

Tripp Lite's SmartRack SRCASTER is a rolling caster kit used to maneuver rack enclosures, wall-mounts and 4 post open frame racks to their desired location. The kit includes 4 casters (249 kg per caster rating), installation guide and mounting hardware. The kit comes standard with all floor standing rack enclosures (48/45/42/25/12U).Note: Casters are intended for minor position adjustments and are not designed for moving racks over long distances.● Rolling caster kit used to maneuver rack enclosures, wall-mounts and 4-post open frame racks... More Info

SmartRack Door Handles with Combination Lock - 2-pack for front and rear...

This replacement combo handle allows facility managers to closely guard access to specific cabinets. Combos can be easily changed when access requirements change but retains a key override for management.● This replacement combo handle allows facility managers to closely guard access to specific cabinets● Combos can be easily changed when access requirements change but retains a key override for management● Two piece replacement combo locks for SmartRack Enclosures● Three digit combo● Key overridePackage Includes● 2pc combo handles ● all... More Info

SmartRack Rack Enclosure Extension Frame - Increases rack external &...

SREXTENDER rack extension frame allows you to increase mounting depth of standard rack enclosure by 8-in. without replacing enclosure and reinstalling existing equipment. SREXTENDER is compatible with SmartRack 42U and 48U enclosures. Ideal for hosting, colocation, and server farm applications that experience rapid growth, requiring the installation of deep server chassis that can pack more processing power in each rack enclosure.- 25U, 42U, or 48U height-adjustable rack extension frame- Increase usable depth of standard rack enclosure by 8... More Info

SmartRack Copper Bus Grounding Bar

The SRGROUND is a full length (42U) bus grounding bar made from heavy-gauge solid copper that attaches to Rack Enclosure Cabinets or Open Frame Racks to provide convenient ground contact for standard rackmount equipment. Every other U space has a drilled and tapped hole to allow a ground wire "jumper" to be installed. The jumper then bridges to the individual pieces of equipment, with grounding straps, allowing a direct path to ground rather than going through surrounding equipment. The SRGROUND can mount in a Tripp Lite enclosure in two... More Info

SmartRack 2U Cantilever Fixed Shelf (60 lb / 27 kg capacity; 18-in. / 457 mm...

Tripp Lite's SmartRack SRSHELF2P is a 2U cantilever mount fixed shelf. Cantilever shelf supports monitors and other equipment with a 27 kgs (60 lbs) capacity. Shelf is compatible with 2 or 4 post rack enclosure cabinets. The SRSHELF2P is 18 inches in depth but can use two shelves back to back to create a deep fixed shelf in 2POST racks. Required mounting hardware is included. ● 2U cantilever mount fixed shelf ● Cantilever shelf supports monitors and other equipment with a 27 kgs (60 lbs) capacity ● Shelf is compatible with 2 or 4 post rack... More Info