Faceplate, preloaded with Cat5e Modules - available with 1, 2 or 4 modules

The Connectix Enhanced Category 5 loaded faceplate consists of 1 or two modules in loaded in a singlegang faceplate or 4 modules loaded in a doublegang faceplate. Ready assembled outlet, ready for installation. Exceeds Enhanced Category 5 specification when used alongside our cable and patch panels Details://   Module DetailsThe Connectix Enhanced Category 5 Compact Module is designed to provide one of the shallowest wall outlets on the market. They are the ideal solution wherever back-box depth is a problem. The attractive... More Info

Fibre Optic Patch Leads with LC Connectors Both Ends. Available in OM1, OM2,...

These Fibre Patch Leads are manufactured from the highest quality optical fibre, terminated with ceramic ferrule connectors of various types. Fibre Cable preparation, termination and testing is carried out to strictly managed procedures in an approved manufacturing facility. Applications include the connections between optical patching panels and network or server equipment and directly from devices to the local or wide area network or physical security equipment. Each Fibre Patch Cable has strain relief boots to prolong and maintain... More Info

24 Port Cat5e UTP RJ45 Patch Panel

These value Cat5e Patch Panels, provide a cost effective solution with all the performance and features you would expect from a much more expensive product. The panels are Independently verified to exceed all the standards for cat5e. Each port is numbered for ease of indentification. Features: Suitable for Gigabit Ethernet applications Individual colour coded saddles allow quick and accurate terminations Top quality sockets Fully QA tested More Info

Right Angled Cat6 RJ45 Patch Panel

The Connectix 2020 Series Patch Panel is an alternative to the Category 6 High Density Panel. It offers the same Category 6 performance as the standard panel but has been designed to present the cable termination IDCs horizontally on a tray at the rear , making termination andcable management easier. Category 6 High Density 24 way panels achieve optimum transmission performances by incorporating the highest quality components and innovative on-board compensation techniques. This panels offer extended PowerSum characteristics and exceeds the... More Info

With 48 Cat5e UTP RJ45 Ports in 2u

These value Cat5e Patch Panels, provide a cost effective solution with all the performance and features you would expect from a much more expensive product. The panels are Independently verified to exceed all the standards for cat5e. Each port is numbered for ease of indentification. More Info

Fibre Optic Patch Leads with SC Connectors at both ends. Available in OM1,...

These patch leads are manufactured from the highest quality optical fibre, terminated with ceramic ferrule connectors of various types. Cable preparation, termination and testing is carried out to strictly managed procedures in an approved manufacturing facility. Applications include the connections between optical patching panels and network or server equipment and directly from devices to the local or wide area network or physical security equipment. Each cable has strain relief boots to prolong and maintain performance levels of the... More Info

Fibre Optic Patch Leads with LC Connectors at one end and ST Connectors the...

These Fibre patch leads are manufactured from the highest quality optical fibre, terminated with ceramic ferrule connectors of various types. Cable preparation, termination and testing is carried out to strictly managed procedures in an approved manufacturing facility. Applications include the connections between optical patching panels and network or server equipment and directly from devices to the local or wide area network or physical security equipment. Each cable has strain relief boots to prolong and maintain performance levels of... More Info

Fibre Optic Patch Leads with ST Connectors at both ends. Available in OM1,...

These patch leads are manufactured from the highest quality optical fibre, terminated with ceramic ferrule connectors of various types. Cable preparation, termination and testing is carried out to strictly managed procedures in an approved manufacturing facility. Applications include the connections between optical patching panels and network or server equipment and directly from devices to the local or wide area network or physical security equipment. Each cable has strain relief boots to prolong and maintain performance levels of the... More Info

Fibre Optic Patch Leads with SC Connectors at one end and ST conntecors at...

These patch leads are manufactured from the highest quality optical fibre, terminated with ceramic ferrule connectors of various types. Cable preparation, termination and testing is carried out to strictly managed procedures in an approved manufacturing facility. Applications include the connections between optical patching panels and network or server equipment and directly from devices to the local or wide area network or physical security equipment. Each cable has strain relief boots to prolong and maintain performance levels of the... More Info

Thru-Coupler Patch Panel with 24 ports in 1u of space

Connectix Through Coupler Panels offer Enhanced Category 5 system performance, and feature 24 ports in 1u. They offer the perfect solution when a panel mounted high performance, high density plug-to-plug connection is required. Designed to match the other panels in the Connectix range the Coupler Panels have RJ45 sockets front and rear to facilitate through coupling. Features: High density, 24 ports in 1u Enhanced Category 5 system performance RJ45 to RJ45 connection   Specifcation: Width - 483mm (19”) Depth - 35mm Height 24 way - 1u (44mm)... More Info

Krone style tool for punching down cable on IDCs

The Connectix Cabling system Punch down tool is perfect when terminating the back of any Connectix Cabling System RJ45 Patch Panels or Module. More Info

19" Cable Management Bar with Horizontal and Vertical Cable Rings

19" Cable Tidy, suitable for mounting on all 19" data cabinets and server racks, allowing cables to be neatly routed. The vertical cable rings create an ideal bend radius for the cables and greatly assists keeping the rack neat.These Cable Management Panels are designed to give extra support for patch leads and prevents obscurring other equipment. These Panels are designed to prevent cable strain. Makes installation neater and more professional More Info

EuroMod size (25x50mm) Low Profile (21mm Deep) Cat5e RJ45 Modules

CCS Cat5e Compact Modules are designed to provide one of the shallowest wall outlets on the market. They are the ideal  solution wherever back-box depth is a problem. The attractive high gloss finish and easy to use labelling system are identical to all other CCS Modules, making them interchangeable in most applications. Cat6e Compact Modules can be fitted into single or dual gang faceplates and can be combined with quarter blanks and/or voice modules to provide the required configuration. The modules offer extended PowerSum... More Info

Faceplate, preloaded with Cat6 Modules - available with 1, 2 or 4 modules

Pre Loaded Faceplates (singlegang for 1 or 2 modules, doublegang for 4 modules) consist of either one or two euromod size modules and a faceplate, with blanks where appropriate. Supplied in a sealed bag these plates save time and money by reducing on site installation and assembly time. Details: Features: Cat6 Compliant Built in slide label system Lifetime product warranty 25 year system warrantyModule Details: CCS Cat6 RJ45 modules are designed to provide one of the shallowest wall outlets on the market. They are the ideal... More Info

Metal Faceplates pre-loaded with Cat6 UTP Modules available in 7 finishes

Single gang metal faceplate loaded with one or two Cat6 Modules Double gang metal faceplate loaded with 4 Cat6 Modules Fit perfectly onto standard size single gang back boxes Ideal for installing into situations where matching the surrounding décor is important. Module DetailsThe Cat6 compact module is designed to provide one of the shallowest outlets on the market. They are the ideal solution wherever back box depth is a problem. Installation is made easy with individual colour codes and the use of industry standard IDC’s. Cat6 modules... More Info

Euromod Size PABX Voice Module

These modules have a standard BT socket for dedicated telephone outlets. Available in Full Master, Secondary and PABX Variations. More Info

Fibre Optic Patch Leads with LC Connectors at one end and SC Connectors the...

These Fibre patch leads are manufactured from the highest quality optical fibre, terminated with ceramic ferrule connectors of various types. Cable preparation, termination and testing is carried out to strictly managed procedures in an approved manufacturing facility. Applications include the connections between optical patching panels and network or server equipment and directly from devices to the local or wide area network or physical security equipment. Each cable has strain relief boots to prolong and maintain performance levels of... More Info

2m USB 2.0 A to A Cable - M/M

More Info

USB 2.0 A Male to A Female Extension Cable

USB Extension Cable for ConvenienceWhether due to space, convenience or décor, sometimes you need a longer USB 2.0 cable. If you need to extend the reach of your USB peripheral - such as a mouse, VoIP phone or printer The cable features an A-Male connector on one end and an A-Female connector on the other. Typically, the Male A connector plugs in to your computer and the Female A connects to the cable you need extending. Check your device manuals to make sure this is the connector you need. This USB 2.0 Extension Cable supports the full... More Info

UK Mains (BS 1363) Plug to IEC 60320 C13 - 5amp Fused

These UK to IEC C13 leads are ideal for connecting between wall sockets or PDU's to your Computers, Servers, Switches and other equipment with a C13 Male Connector. Features: UK BS 1363 Plug Fused with a 5amp fuse IEC 60320 C13 Female Connector Available in 1mt, 2mt, 5mt & 10mt More Info

SVGA DDC2 Monitor Cable with Male - Male Connections

SVGA cables suitable for connecting PC's/Laptops/Notebooks to Monitors, Displays and TV's Constructed using UL2919 approved 28awg triple mini coaxial and 4x 28awg conductor cables Triple shielded with copper braid, foil and drain wire. Features:HD15 Male - Male Up to 20mt All pins connected Pins 12+15 connected to ensure all possible resolutions are supported and the video card is always perfectly set up against the monitor DDC2 More Info

Cat5e UTP PVC Solid Cable Available on a 100mt Reel

CCS Cat5e UTP Cable is designed for high speed LANs including Gigabit Ethernet applications. When used with CCS Cat5e patch panels and modules it gives the exceptional performance required for transmission over all four pairs. The cable is supplied in easy to use 100mt Reels. Cat5e UTP PVC Cable Details: Features: Suitable for Gigabit Ethernet applications PVC outer sheath Supplied metre marked Pure copper cores Excellent performance exceeding ANSI/TIA Cat5e specifications More Info

Cat6 Contractor Pack

Our Cat6 Contractor pack includes - 1 x 24 Way Cat6 UTP Patch Panel 12 x Single Gange Faceplate loaded each with 2 modules 1 x Cable Management Bar. The kit comes supplied in a handy box. More Info

Kit Includes RJ45 Crimp tool, Cat6 Plugs, Stripper & Continuity Tester

This simple termination kit includes all the products required for terminating RJ45 Cat6 Cables & Testing the finished leads. (cable not included)Kit includes: 1 x RJ45 Crimp Tool 1 x Cable Stripper 1 x Contunity Tester 100 x Cat6 RJ45 Plugs 100 x Strain relief boots (select colour above) More Info