Racks & Cabinets (1030 products)

SmartRack Roof-Mounted Cable Trough Vertical Expansion Plates - Requires...

Tripp Lite's SmartRack SRCABLETRAYEXP adds an additional level of cable routing to the SRCABLETRAY (required part). When used with the SRCABLETRAY these expansion plates allow dedicated, separate paths for power, data and fiber cables. The SRCABLETRAYEXP helps eliminate cable stress by organizing cables outside of the SmartRack enclosure. Convenient, toolless mounting on the top panel of the SmartRack enclosure.● Tripp Lite's SmartRack SRCABLETRAYEXP adds an additional level of cable routing to the SRCABLETRAY (required part)● When used with... More Info

T91A03, DIN Rail Clip

The clip, made of steel, enables mounting on a standard 35mm DIN rail. The kit includes a DIN Rail Clip with a mounting plate and screws for attaching the device to the clip. More Info

SmartRack Rolling Caster Kit, 4 pack

Tripp Lite's SmartRack SRCASTER is a rolling caster kit used to maneuver rack enclosures, wall-mounts and 4 post open frame racks to their desired location. The kit includes 4 casters (249 kg per caster rating), installation guide and mounting hardware. The kit comes standard with all floor standing rack enclosures (48/45/42/25/12U).Note: Casters are intended for minor position adjustments and are not designed for moving racks over long distances.● Rolling caster kit used to maneuver rack enclosures, wall-mounts and 4-post open frame racks... More Info

SmartRack Door Handles with Combination Lock - 2-pack for front and rear...

This replacement combo handle allows facility managers to closely guard access to specific cabinets. Combos can be easily changed when access requirements change but retains a key override for management.● This replacement combo handle allows facility managers to closely guard access to specific cabinets● Combos can be easily changed when access requirements change but retains a key override for management● Two piece replacement combo locks for SmartRack Enclosures● Three digit combo● Key overridePackage Includes● 2pc combo handles ● all... More Info

SmartRack Rack Enclosure Extension Frame - Increases rack external &...

SREXTENDER rack extension frame allows you to increase mounting depth of standard rack enclosure by 8-in. without replacing enclosure and reinstalling existing equipment. SREXTENDER is compatible with SmartRack 42U and 48U enclosures. Ideal for hosting, colocation, and server farm applications that experience rapid growth, requiring the installation of deep server chassis that can pack more processing power in each rack enclosure.- 25U, 42U, or 48U height-adjustable rack extension frame- Increase usable depth of standard rack enclosure by 8... More Info

SmartRack Copper Bus Grounding Bar

The SRGROUND is a full length (42U) bus grounding bar made from heavy-gauge solid copper that attaches to Rack Enclosure Cabinets or Open Frame Racks to provide convenient ground contact for standard rackmount equipment. Every other U space has a drilled and tapped hole to allow a ground wire "jumper" to be installed. The jumper then bridges to the individual pieces of equipment, with grounding straps, allowing a direct path to ground rather than going through surrounding equipment. The SRGROUND can mount in a Tripp Lite enclosure in two... More Info

2 slot chassis for Converteon blades

The AT-CV1203, 2 Slot, metal chassis is designed to house the range of Converteon media blades. It can be installed with up to either one or two single width blades, or one double width blade. For flexible deployment, the AT-CV1203 chassis can be installed on a desktop by adding four rubber feet. It can also be wall-mounted, or mounted under the desk with the optional AT-CVMNT wall-mount bracket. More Info

IT Power Distribution Module 3 Pole 5 Wire 32A IEC309 1040cm

- High Power Density- Low Cost Power Distribution- Meets UL Requirements More Info

SmartRack 2U Cantilever Fixed Shelf (60 lb / 27 kg capacity; 18-in. / 457 mm...

Tripp Lite's SmartRack SRSHELF2P is a 2U cantilever mount fixed shelf. Cantilever shelf supports monitors and other equipment with a 27 kgs (60 lbs) capacity. Shelf is compatible with 2 or 4 post rack enclosure cabinets. The SRSHELF2P is 18 inches in depth but can use two shelves back to back to create a deep fixed shelf in 2POST racks. Required mounting hardware is included. ● 2U cantilever mount fixed shelf ● Cantilever shelf supports monitors and other equipment with a 27 kgs (60 lbs) capacity ● Shelf is compatible with 2 or 4 post rack... More Info

IT Power Distribution Module 3 Pole 5 Wire 32A IEC309 500cm

- High Power Density- Low Cost Power Distribution- Meets UL Requirements More Info

SmartRack 1U Cantilever Fixed Shelf (40 lb / 18 kg capacity; 12-in. / 305 mm...

Batteries not Required to OperateFixed Shelf, 1U Cantilever mount, Cold rolled steel with black finish. Required mounting hardware included. Supports up to 18 kg (40 lbs.)Use two shelves back to back to create a deep fixed shelf in 2POST racks. - Fixed Shelf, 1U Cantilever mount. Required mounting hardware included - 2 or 4 post rack compatible - 12 inch shelf depth - Cantilever shelf supports monitors and other equipment - Cold rolled steel with black finish. - Use two shelves back to back to create a deep fixed shelf in 2POST racks - Shelf... More Info

SmartRack Heavy-Duty Fixed Shelf (250 lb/113 kg capacity; 26 in/660 mm depth)

Tripp Lite's SmartRack SRSHELF4PHD accommodates tower units, monitors and other equipment. The fixed heavy-duty shelf offers 25.5 inches of shelf depth and supports up to 113 kgs (250 lbs) SRSHELF4PHD is designed for 4 post rack mounting. Required mounting hardware is included. ● Accommodates tower units, monitors and other equipment ● Fixed heavy-duty shelf offers 25.5 inches of shelf depth and supports up to 113 kgs (250 lbs) ● Designed for 4 post rack mounting ● Required mounting hardware is included More Info

SmartRack Keyboard Shelf (25 lb/11 kg capacity; 40.64 cm (16 ") / 406 mm depth)

Tripp Lite's SmartRack SRSHELF4PKYBD is a sliding keyboard shelf designed for all standard 17 inch keyboards. The SRSHELF4PKYBD is an extendible shelf to allow quick access to the keyboard or for storage when not in use. It is designed for 4 post rack mounting and has a 11 kg (25lb) weight capacity. Required mounting hardware is included. ● Sliding keyboard shelf designed for all standard 17 inch keyboards. ● Extendable shelf to allow quick access to the keyboard or for storage when not in use ● Designed for 4 post rack mounting ● 11 kg... More Info

SmartRack Standard Sliding Shelf (50 lb/23 kg capacity; 28.25 in/660 mm depth)

Tripp Lite's SmartRack SRSHELF4PSL is a standard sliding shelf for installation in rack cabinets. The SRSHELF4PSL has a 28.3 in. / 72cm depth (29.5 in. / 74.9cm including handle) and can support up to 23 kg (50lbs.) This fully extendable shelf can accommodate tower units, monitors and other equipment. It is designed for 4 post rack mounting and the required mounting hardware is included. Expandable mounting rails supports installation in racks with front to rear rail distances between 28 in. / 71cm minimum and 46 in. / 117cm maximum. ●... More Info

SmartRack Heavy-Duty Sliding Shelf (200 lb/91 kg capacity; 26 in/660 mm depth.)

Tripp Lite's SmartRack SRSHELF4PSLHD is a heavy duty sliding shelf for installation in rack cabinets. The SRSHELF4PSLHD has a 28.3 in. / 72 cm depth (29.5 in. / 74.9cm including handle) and can support up to 90 kgs (200 lbs) This fully extendible shelf can accommodate tower units, monitors and other equipment. It is designed for 4 post rack mounting and the required mounting hardware is included. Expandable mounting rails supports installation in racks with front to rear rail distances between 28 in. / 71cm minimum and 46 in. / 117cm... More Info