List of products by manufacturer TP-Link

9× 10/100/1000 Mbps RJ45, 1× 1000 Mbps Combo SFP/RJ45, 20 Gbps, 4 K MAC, 209...

What This Product Does TP-Link TL-SG1210MPE is an easy smart switch with 9× gigabit RJ45 ports and 1× gigabit combo SFP/RJ45 port that requires no configuration. With 8× PoE (Power over Ethernet) ports, it can automatically detect and supply power with all IEEE 802.3af/at compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones,... More Info

SC, RJ-45, 10/100Base-TX/FX, 94.5x73x27 mm

What This Product DoesTL-FC111B-20 is a 100M media converter, providing a 100M RJ-45 port and a 100M SC fiber port, which can convert between electrical and optical signals. And long-distance data transmission through optical fiber can be applied to commercial scenarios such as park security monitoring and wireless networking.How This Product WorksTL-FC111B-20 adopts WDM (wavelength division multiplexing) technology, helping send and receive data at a distance of up to 20km (12.4 miles) over only one fiber, which saves half of the cable... More Info

SC, RJ-45, 100Base-FX, 94.5x73x27 mm

What This Product DoesTL-FC111A-20 is a 100M media converter, providing a 100M RJ-45 port and a 100M SC fiber port, which can convert between electrical and optical signals. And long-distance data transmission through optical fiber can be applied to commercial scenarios such as park security monitoring and wireless networking.How This Product WorksTL-FC111A-20 adopts WDM (wavelength division multiplexing) technology, helping send and receive data at a distance of up to 20km (12.4 miles) over only one fiber, which saves half of the cable... More Info

MC100CM 1x 100M SC, 1x 100M RJ45, IEEE 802.3, IEEE 802.3u, IEEE 802.3x

- Complies with 802.3u 10/100Base-TX, 100Base-FX standards.- Provides switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port.- Extends fiber distance up to 2kmThe MC100CM is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC100CM is designed for use with multi-mode fiber cable utilizing the SC-Type connector. The MC100CM supports shortwave (SX) laser specification at a full wire speed forwarding rate.... More Info

MC110CS 1x 100M SC, 1x 100M RJ45, IEEE 802.3, IEEE 802.3u, IEEE 802.3x

- Complies with 802.3u 10/100Base-TX, 100Base-FX standards.- Provides switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port.- Extends fiber distance up to 20－60kmThe MC110CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC110CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC110CS supports shortwave (SX) laser specification at a full wire speed forwarding... More Info

MC112CS 1x 100M SC, 1x 100M RJ45, IEEE 802.3, IEEE 802.3u, IEEE 802.3x

- Complies with 802.3u 10/100Base-TX, 100Base-FX standards.- Adopts WDM technology, transmitting and receiving data on one single fiber. The MC112CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Adopting WDM technology, MC112CS takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC112CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The... More Info

MC111CS 1x 100M SC, 1x 100M RJ45, IEEE 802.3, IEEE 802.3u, IEEE 802.3x

- Complies with 802.3u 10/100Base-TX, 100Base-FX standards- Adopts WDM technology, transmitting and receiving data on one single fiberThe MC111CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Adopting WDM technology, MC111CS takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC111CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The... More Info

9/125 μm single-mode, IEEE802.3, IEEE802.3i, IEEE802.3u, 1310 nm TX, 1550 nm...

What This Product Does TL-FC111PB-20 is a 10/100 Mbps media converter with 802.3af PoE output, providing 1× 10/100 Mbps PoE RJ45 port and 1× 100 Mbps SC fiber port, which can convert between electrical and optical signals. With up to 20 km fiber transmission distance and 802.3af PoE output, the media converter is designed to address the needs of flexible long-range surveillance deployment with optical fibers. It provides an economical path towards extending the distance of an existing network. How This Product Works TL-FC111PB-20 adopts WDM... More Info

TL-SM321A - 1000Base-BX WDM Bi-Directional SFP Module

Spotlight:- WDM Bi-Directional SFP Module- Supports WDM Bi-Directional technology, using a single strand of fiber, cost savingTP-LINK´s TL-SM321A adopts the latest standard 1000Base-BX, transmission over a single strand of fiber, with one different wavelength going in each direction. You can extend the network distance up to 10Km with TP-LINK´s Routers, Switches, Media Converters to provide high speed and stability.- Supports WDM Bi-Directional technology, using a single strand of fiber- TX: 1550nm / RX: 1310nm- Internal +3.3V Power Supply-... More Info

TL-SM321B - 1000Base-BX WDM Bi-Directional SFP Module

Spotlight:- WDM Bi-Directional SFP Module- Supports WDM Bi-Directional technology, using a single strand of fiber, cost savingTP-LINK´s TL-SM321B adopts the latest standard 1000Base-BX, transmission over a single strand of fiber, with one different wavelength going in each direction. You can extend the network distance up to 10Km with TP-LINK´s Routers, Switches, Media Converters to provide high speed and stability.Features- Supports WDM Bi-Directional technology, using a single strand of fiber- TX: 1310nm / RX: 1550nm- Internal +3.3V Power... More Info

1000BASE-T RJ45 SFP, 850nm, 3.3V, 1.25 Gbps

1000BASE-T RJ45 SFP ModuleExtend your copper connection by up to 100 metersGigabit Port for a High-Speed ConnectionTransmit data seamlessly up to 100 meters between your SFP interface and the copper gigabit port.Plug and PlayA plug-and-play design makes for easy deployment, no technician needed.Durable Metal CasingHigh-quality metal casing ensures strength and reliability for a long time, maintaining a stable connection in a wide range of environments.Ensured CompatibilityTL-SM331T is compatible with various optic fiber equipment from... More Info

10G BASE-T RJ45 SFP+, 10.3 Gbps, 1× 10G RJ45 Port

What This Product DoesTL-SM5310-T provides superior 10G performance for an easy and quick connection between your SFP+ interface and RJ45 port. It covers up to 30m* at 10 Gbps (UTP cat.6a or above). A plug-and-play design makes for easy deployment, no technician needed. High-quality metal casing ensures strength and reliability for a long time, maintaining a stable connection in a wide range of environments. More Info

LC Duplex, 10 Gbps, IEEE 802.3ae, TCP/IP, 1310 nm, 9/125um Single-Mode

The TL-SM5110-LR is designed to extend transfer distances based on 10Gbps Ethernet connectivity. It is a 10GBASE-LR high performance 1310 nm single-mode SFP+ transceiver. It supports full duplex, 10G Ethernet connections up to 10 km with 9/125µm fiber cables respectively. More Info

LC/UPC, 10Gbps, IEEE 802.3ae, TCP/IP, SFF-8472, 850nm, 50/125um / 62.5/125um...

The TL-SM5110-SR is designed to extend transfer distances based on 10Gbps Ethernet connectivity. It is a 10GBASE-SR high performance 850nm multi-mode SFP+ transceiver. It supports full duplex, 10G Ethernet connections up to 300m or 33m with 50/125µm or 62.5/125µm fiber cables respectively. More Info

TL-MC1400, 14-Slot Rackmount Media Converter Chassis

The TL-MC1400 14-Slot Rack-mount Chassis is specially designed to accommodate 14 TP-LINKs Media Converters for central power supply, saving space and power cables. Continuous operation is of great importance to fiber communication, so the chassis is equipped with optional redundant power supply and Hot-Swapping function which allows installing/removing the converter/power supply without powering off the chassis. Moreover, to stabilize the performance and extend the lifetime, two cooling fans are installed internally. Together with MC series... More Info